Topic: servo over internet
Hi how can i conect a servo and control it over internet. I try but dont know what it went bad.
*/
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266WIFI_LIB_CLOUD
#include <ESP8266WiFi.h>
#include <RemoteXY.h>
// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "ssid"
#define REMOTEXY_WIFI_PASSWORD "pasword"
#define REMOTEXY_CLOUD_SERVER "cloud.remotexy.com"
#define REMOTEXY_CLOUD_PORT 6376
#define REMOTEXY_CLOUD_TOKEN "7be61463064988e6e3903aa9d7rr32a2"
// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255,1,0,0,0,11,0,10,13,1,
4,0,24,22,14,43,2,26 };
// this structure defines all the variables and events of your control interface
struct {
// input variables
uint8_t select_1; // =0 if select position A, =200 if position B, =500 if position C, =1000
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#include <Servo.h>
Servo myservo;
void setup()
{
RemoteXY_Init ();
myservo.attach(9);
RemoteXY.select_1 = 50;
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
int ms = RemoteXY.select_1;
myservo.writeMicroseconds(ms);
}