Topic: Code generated fail

I'm having a problem with the code for Arduino generated on the site.
When I use the sample library code for a single button, the RemoteXY_CONF [] array (with 15 elements)

unsigned char RemoteXY_CONF [] =
   , 12,12,2,88,0};
With this code it works perfectly when I charge on the smartphone.
But when I generate the code on the website, the RemoteXY_CONF [] array (with 20 elements)

uint8_t RemoteXY_CONF [] =

With this code I can't charge on the smartphone.
Have any of you ever had this problem, or can you help me?


Re: Code generated fail

You have to use all code from website from RemoteXY include library to END RemoteXY include. Do not copy RemoteXY_CONF only.


Re: Code generated fail

Thanks for the reply.
I had just sent the RemoteXY_CONF [] print because it was generated differently from the library example.
The code was copied completely to the Arduino IDE, and does not work on the smartphone.

Follow the complete code.

The difference between the example code and the code generated on the site occurs exactly occurs in RemoteXY_CONF [] ...

Is there any way to help me?
thank you.

/ *
   - Button -
   This source code of graphical user interface
   has been generated automatically by RemoteXY editor.
   To compile this code using RemoteXY library 2.4.3 or later version
   download by link http://remotexy.com/en/library/
   To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
     - for ANDROID 4.5.1 or later version;
     - for iOS 1.4.1 or later version;
   This source code is free software; you can redistribute it and / or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.
* /

// RemoteXY include library //

// RemoteXY select connection mode and include library

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_SERIAL Serial1
#define REMOTEXY_WIFI_PASSWORD "12345678"

// RemoteXY configurate
#pragma pack (push, 1)
uint8_t RemoteXY_CONF [] =
// this structure defines all the variables and events of your control interface
struct {

    // input variables
  uint8_t button_1; // = 1 if button pressed, else = 0

    // other variable
  uint8_t connect_flag; // = 1 if wire connected, else = 0

} RemoteXY;
#pragma pack (pop)

// END RemoteXY include //

#define PIN_BUTTON_1 13

void setup ()
  RemoteXY_Init ();
  pinMode (PIN_BUTTON_1, OUTPUT);
  // TODO you setup code

void loop ()
  RemoteXY_Handler ();
  digitalWrite (PIN_BUTTON_1, (RemoteXY.button_1 == 0)? LOW: HIGH);
  // TODO you loop code
  // use the RemoteXY structure for data transfer
  // do not call delay ()



Re: Code generated fail

Problem solved.
I updated the ESP8266 Wifi firmware and the code worked perfectly.
Thank you.