Topic: Add delay to button control
Heloo everyone, Im a new remotexy user here. I need some help here.
Im using Arduino Uno and Esp 8266 Wifi Module to control a relay that is connected to a solenoid door lock.
Just wondering how can i add a delay to the button control on the smartphone that the button stay on high (Unlock Door) 3 seconds before going to low(Lock Door) again.
TQ
My Code:
/*
-- New project --
This source code of graphical user interface
has been generated automatically by RemoteXY editor.
To compile this code using RemoteXY library 2.4.3 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.5.1 or later version;
- for iOS 1.4.1 or later version;
This source code is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
*/
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266_HARDSERIAL_POINT
#include <RemoteXY.h>
// RemoteXY connection settings
#define REMOTEXY_SERIAL Serial
#define REMOTEXY_SERIAL_SPEED 115200
#define REMOTEXY_WIFI_SSID "RemoteXY"
#define REMOTEXY_WIFI_PASSWORD "12345678"
#define REMOTEXY_SERVER_PORT 6377
// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255,1,0,0,0,13,0,10,13,1,
1,0,20,37,21,21,2,31,88,0 };
// this structure defines all the variables and events of your control interface
struct {
// input variables
uint8_t Unlock_Door; // =1 if button pressed, else =0
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#define PIN_UNLOCK_DOOR 2
void setup()
{
RemoteXY_Init ();
pinMode (PIN_UNLOCK_DOOR, OUTPUT);
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
digitalWrite(PIN_UNLOCK_DOOR, (RemoteXY.Unlock_Door==0)?LOW:HIGH);
// TODO you loop code
// use the RemoteXY structure for data transfer
// do not call delay()
}