Topic: Compatibility with WS2812FX
Hello,
My name is Jérémie, I'm new here and I just discovered RemoteXY, it's really great and make possible a mobile APP for microcontroller ! Amazing !
In my project, I use standalone a ESP01 and I want to make led effects.
I'm trying to use this nice librairy WS2812FX : https://github.com/kitesurfer1404/WS2812FX
It works well but when I add this instruction to start it in tne loop "ws2812fx.service();" I have connection issue from the mobile phone with RemoteXY, It cannot connect anymore, there must be some conflict ? I use the ESP01 as an access point.
Can someone please have a look ?
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266WIFI_LIB_POINT
#include <ESP8266WiFi.h>
#include <RemoteXY.h>
// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "RemoteXY"
#define REMOTEXY_WIFI_PASSWORD "12345678"
#define REMOTEXY_SERVER_PORT 6377
// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255,5,0,0,0,64,0,10,0,1,
1,1,12,18,42,8,2,16,88,0,
2,0,12,33,42,8,2,26,31,31,
79,78,0,79,70,70,0,6,0,13,
49,41,41,2,16,129,0,6,5,55,
6,15,76,69,68,32,67,111,110,116,
114,111,108,32,67,101,110,116,101,114,
0 };
// this structure defines all the variables and events of your control interface
struct {
// input variables
uint8_t button_1; // =1 if button pressed, else =0
uint8_t switch_1; // =1 if switch ON and =0 if OFF
uint8_t rgb_1_r; // =0..255 Red color value
uint8_t rgb_1_g; // =0..255 Green color value
uint8_t rgb_1_b; // =0..255 Blue color value
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#include <WS2812FX.h>
#define LED_PIN 2 // 0 = GPIO0, 2=GPIO2
#define LED_COUNT 150
#define DEFAULT_COLOR 0xFF5900
#define DEFAULT_BRIGHTNESS 128
#define DEFAULT_SPEED 1000
#define DEFAULT_MODE FX_MODE_RAINBOW_CYCLE
String modes = "";
uint8_t myModes[] = {}; // *** optionally create a custom list of effect/mode numbers
boolean auto_cycle = false;
WS2812FX ws2812fx = WS2812FX(LED_COUNT, LED_PIN, NEO_GRB + NEO_KHZ800);
void setup()
{
RemoteXY_Init ();
ws2812fx.init();
ws2812fx.setMode(DEFAULT_MODE);
ws2812fx.setColor(DEFAULT_COLOR);
ws2812fx.setSpeed(DEFAULT_SPEED);
ws2812fx.setBrightness(DEFAULT_BRIGHTNESS);
ws2812fx.start();
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
ws2812fx.service();
// TODO you loop code
// use the RemoteXY structure for data transfer
// do not call delay()
}