Topic: Nano works perfectly but impossible to repeat it with Mega 2560
Hi,
I bought PRO version and I'm trying to make it works with my MEGA 2560 Mini.
My setup:
- 2pcs Bluetooth modules (HM10 clown)
- Arduino Nano (LED D13)
- Arduino Mega 2560 Mini (LED D13)
- RemoteXY PRO + latest lib + Arduino IDE
- Android Samsung phone
- Basic "Blink" BT HardSerial test program applied for testing
A very strange thing is happening:
- D13 LED flashes as expected with both HM10 applied to Nano.
- BT connected but "Device not reply. Receive time out error" with both HM10 applied to Mega 2560 Mini !?!!
- RemoteXY editor: right MCU "Mega 2560" selected in config + HardSerial Rx0/Tx1.
- BLE paired & Mega 2560 HardSerial is running well with any Hyperterminal over BT.
Any idea?
Thank :-)
/*
-- Mega_2560_test --
This source code of graphical user interface
has been generated automatically by RemoteXY editor.
To compile this code using RemoteXY library 2.3.5 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.3.1 or later version;
- for iOS 1.3.5 or later version;
This source code is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
*/
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__HARDSERIAL
#include <RemoteXY.h>
// RemoteXY connection settings
#define REMOTEXY_SERIAL Serial
#define REMOTEXY_SERIAL_SPEED 38400
// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255,1,0,0,0,13,0,8,13,0,
1,0,23,17,12,12,2,31,88,0 };
// this structure defines all the variables of your control interface
struct {
// input variable
uint8_t button_1; // =1 if button pressed, else =0
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#define PIN_BUTTON_1 13
void setup()
{
RemoteXY_Init ();
pinMode (PIN_BUTTON_1, OUTPUT);
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
digitalWrite(PIN_BUTTON_1, (RemoteXY.button_1==0)?LOW:HIGH);
// TODO you loop code
// use the RemoteXY structure for data transfer
}