Thanks for the reply.
I had just sent the RemoteXY_CONF [] print because it was generated differently from the library example.
The code was copied completely to the Arduino IDE, and does not work on the smartphone.
Follow the complete code.
The difference between the example code and the code generated on the site occurs exactly occurs in RemoteXY_CONF [] ...
Is there any way to help me?
thank you.
/ *
- Button -
This source code of graphical user interface
has been generated automatically by RemoteXY editor.
To compile this code using RemoteXY library 2.4.3 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.5.1 or later version;
- for iOS 1.4.1 or later version;
This source code is free software; you can redistribute it and / or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
* /
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266_HARDSERIAL_POINT
#include <RemoteXY.h>
// RemoteXY connection settings
#define REMOTEXY_SERIAL Serial1
#define REMOTEXY_SERIAL_SPEED 9600
#define REMOTEXY_WIFI_SSID "RemoteXY"
#define REMOTEXY_WIFI_PASSWORD "12345678"
#define REMOTEXY_SERVER_PORT 6377
// RemoteXY configurate
#pragma pack (push, 1)
uint8_t RemoteXY_CONF [] =
{255,1,0,0,0,13,0,10,13,0,
1,0,42,7,12,12,2,31,88,0};
// this structure defines all the variables and events of your control interface
struct {
// input variables
uint8_t button_1; // = 1 if button pressed, else = 0
// other variable
uint8_t connect_flag; // = 1 if wire connected, else = 0
} RemoteXY;
#pragma pack (pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#define PIN_BUTTON_1 13
void setup ()
{
RemoteXY_Init ();
pinMode (PIN_BUTTON_1, OUTPUT);
// TODO you setup code
}
void loop ()
{
RemoteXY_Handler ();
digitalWrite (PIN_BUTTON_1, (RemoteXY.button_1 == 0)? LOW: HIGH);
// TODO you loop code
// use the RemoteXY structure for data transfer
// do not call delay ()
}