Path of Exile 3.30: Data di Uscita e Annuncio Ufficiale
Grinding Gear Games ha confermato che Path of Exile 3.30 arriverà il 13 novembre 2026 (PST). La presentazione ufficiale dei nuovi contenuti è prevista durante ExileCon 2026, con il keynote del 6 novembre.
L'evento dovrebbe svelare i dettagli della prossima espansione, comprese le nuove meccaniche, le modifiche al gameplay e gli eventuali aggiornamenti alle classi. Per ora, gli sviluppatori non hanno ancora pubblicato tutte le informazioni sulla nuova lega.
Curse of the Allflame: Le Principali Novità della Versione 3.29
Prima di guardare alla prossima espansione, vale la pena ricordare i contenuti principali di Curse of the Allflame.
1. Nuova Meccanica Oceanica
I giocatori possono collaborare con Valerie, una capitana pirata, per esplorare i fondali marini di Wraeclast. Utilizzando speciali carte nautiche, è possibile organizzare spedizioni a bordo della Sovereign, raccogliendo tesori e affrontando creature pericolose. Le lanterne alimentate dall'Allflame proteggono dall'ambiente sottomarino, ma il tempo a disposizione è limitato.
2. Nuova Ascendenza Luminary
La Scion riceve una nuova classe Ascendancy chiamata Luminary. La sua caratteristica principale è la possibilità di assumere permanentemente un Mercenario come alleato in combattimento e modificarne l'equipaggiamento, offrendo nuove opportunità per creare build personalizzate.
3. Miglioramenti ad Abyss e Legion
Abyss riceve una revisione delle fratture, dei mostri e degli effetti visivi, rendendo gli scontri più dinamici. Anche Legion introduce nuove possibilità di crafting e ricompense dedicate.
4. Modifiche alle Gemme e agli Incantesimi
Il sistema degli slot viene migliorato eliminando le restrizioni legate ai colori delle gemme. Inoltre, oltre cento incantesimi vengono ribilanciati, insieme a nuove Gemme Pact e diverse opzioni di supporto per gli incantatori.
Cosa Aspettarsi dalla Versione 3.30?
Uno degli aspetti più attesi riguarda il rinnovamento dell'endgame. Gli sviluppatori hanno anticipato cambiamenti importanti alle meccaniche delle leghe esistenti, con nuove interazioni e opportunità per ottenere ricompense attraverso gli scontri.
Anche la gestione della Valuta POE continuerà a essere importante per acquistare equipaggiamento, migliorare le build e prepararsi alle nuove sfide.
Conclusione
Path of Exile 3.30 rappresenta un appuntamento importante per la community. Mentre Curse of the Allflame ha introdotto interessanti novità nell'esplorazione e nella personalizzazione dei personaggi, la prossima espansione potrebbe portare cambiamenti ancora più significativi. I giocatori dovranno seguire ExileCon 2026 per scoprire tutti i dettagli e prepararsi al nuovo inizio.
Per prepararti alle nuove sfide di Path of Exile 3.30 e migliorare la tua progressione, puoi Valuta POE in vendita su -.com usando il codice sconto “Specific” per ottenere l’8% di sconto.
]]>//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// you can enable debug logging to Serial at 115200
//#define REMOTEXY__DEBUGLOG
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__WIFI_CLOUD
#include <WiFi.h>
// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "starlinkbro"
#define REMOTEXY_WIFI_PASSWORD "kermet765"
#define REMOTEXY_CLOUD_SERVER "cloud.remotexy.com"
#define REMOTEXY_CLOUD_PORT 6376
#define REMOTEXY_CLOUD_TOKEN "02400487f95a641886bbc6c7526963e0"
#include <RemoteXY.h>
// RemoteXY GUI configuration
#pragma pack(push, 1)
uint8_t const PROGMEM RemoteXY_CONF_PROGMEM[] = // 37 bytes V19
{ 255,1,0,0,0,30,0,19,0,0,0,0,31,1,106,200,1,1,1,0,
2,31,11,44,22,0,2,26,31,31,79,78,0,79,70,70,0 };
// this structure defines all the variables and events of your control interface
struct {
// input variables
uint8_t switch_01; // =1 if switch ON and =0 if OFF, from 0 to 1
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#define PIN_SWITCH_01 2
void setup()
{
RemoteXY_Init (); // initialization by macros
pinMode (PIN_SWITCH_01, OUTPUT);
// TODO you setup code
}
void loop()
{
RemoteXYEngine.handler ();
digitalWrite(PIN_SWITCH_01, (RemoteXY.switch_01==0)?LOW:HIGH);
// TODO you loop code
// use the RemoteXY structure for data transfer
// do not call delay(), use instead RemoteXYEngine.delay()
}Is there a way to fix this?
Regards
Andy
Im able to get a simple switch working over cloud for a project..... (esp8266)
But adding a temp gauge to the same GUI and allocation of pin and or intentions (unlike the snap to pin feature)
are they done by sketch or is there a easier way.....
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#define PIN_BUTTON_01 4
#define PIN_BUTTON_02 5
#define PIN_BUTTON_03 6
#define PIN_BUTTON_04 7
#define PIN_BUTTON_05 3
void RemoteXY_page_01_event() {
// TODO: RemoteXY.page_01 ???? ????????
}
void setup()
{
RemoteXY_Init (); // initialization by macros
pinMode (PIN_BUTTON_01, OUTPUT);
pinMode (PIN_BUTTON_02, OUTPUT);
pinMode (PIN_BUTTON_03, OUTPUT);
pinMode (PIN_BUTTON_04, OUTPUT);
pinMode (PIN_BUTTON_05, OUTPUT);
RemoteXYEngine.addVariableEvent (RemoteXY.page_01, RemoteXY_page_01_event);
// TODO you setup code
}
void loop()
{
RemoteXYEngine.handler ();
digitalWrite(PIN_BUTTON_01, (RemoteXY.button_01==0)?LOW:HIGH);
digitalWrite(PIN_BUTTON_02, (RemoteXY.button_02==0)?LOW:HIGH);
digitalWrite(PIN_BUTTON_03, (RemoteXY.button_03==0)?LOW:HIGH);
digitalWrite(PIN_BUTTON_04, (RemoteXY.button_04==0)?LOW:HIGH);
digitalWrite(PIN_BUTTON_05, (RemoteXY.button_05==0)?LOW:HIGH);
// TODO you loop code
// используйте структуру RemoteXY для передачи данных
// не используйте функцию delay(), вместо нее используйте RemoteXYEngine.delay()
}le for the RemoteXY library.
]]>I can get the time from the app and use it in my sketch with the example in the documents:
time = RemoteXY.realTime_01.getAppTime();...but I can't get the time from the Arduino controller. Seems I've tried everything without success. Either it fails to compile or it ignores updating the time. I don't think I understand the 'format' needed to do this, so I'm just guessing... and that's not working out.
Can someone please provide a simple example of getting the time from the controller?
Thank you,
Gary
--
What can I 'poll' or 'ping' that will let me know if the app is connected before the program moves into the main loop?
Thank you so much for any ideas!
Gary
--
When I imported the code to my Arduino, I get compiling errors. I found that the "uint8_t connect_flag" was removed when Real Time was added.
I forced "uint8_t connect_flag" back into the code and it now complies, but the connect_flag doesn't work.
It's like I get to use one or the other, but not both.
Is it just me, or is there an issue here?
Before adding Real Time (this runs okay):
/*
-- HP Meter Graph 7 --
To compile this code using RemoteXY library 4.1.8 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.18.03 or later version;
- for iOS 1.14.1 or later version;
To interact with the GUI, please refer to the manual:
https://remotexy.com/ru/help/code/interaction/
This source code was automatically generated by the RemoteXY editor and
is an example for the RemoteXY library.
Licensed under the MIT License. See the LICENSE file in the RemoteXY library
root (https://github.com/RemoteXY/RemoteXY-Arduino-library) for full license
details.
*/
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// you can enable debug logging to Serial at 115200
//#define REMOTEXY__DEBUGLOG
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__HARDSERIAL
// RemoteXY connection settings
#define REMOTEXY_SERIAL Serial2
#define REMOTEXY_SERIAL_SPEED 115200
#define REMOTEXY_ACCESS_PASSWORD "1234"
#include <RemoteXY.h>
// RemoteXY GUI configuration
#pragma pack(push, 1)
uint8_t const PROGMEM RemoteXY_CONF_PROGMEM[] = // 640 bytes V19
{ 255,38,0,24,0,121,2,19,0,0,0,72,80,32,77,101,116,101,114,32,
66,117,100,100,121,0,24,1,200,116,4,2,3,2,2,20,0,68,1,23,
198,91,49,25,36,86,111,108,116,115,0,67,161,11,31,12,78,36,24,3,
67,23,14,22,8,78,36,24,3,67,69,14,22,8,78,36,24,3,1,99,
14,28,7,9,9,31,82,101,115,101,116,32,77,105,110,92,47,77,97,120,
0,14,6,6,26,7,77,1,94,26,13,33,6,27,7,77,7,94,26,7,
61,6,37,7,69,64,31,12,11,129,63,1,32,5,64,17,80,67,73,32,
85,32,78,117,109,98,101,114,0,129,15,1,11,5,64,17,68,97,116,101,
0,129,40,1,12,5,64,17,84,105,109,101,0,129,162,2,34,6,64,17,
76,105,118,101,32,82,101,97,100,105,110,103,0,129,192,13,6,8,64,80,
86,0,129,55,15,14,7,64,17,77,105,110,58,0,129,6,15,16,7,64,
17,77,97,120,58,0,129,45,16,4,5,64,66,86,0,129,92,16,4,5,
64,66,86,0,1,99,6,28,7,9,3,133,83,97,118,101,32,84,111,32,
70,105,108,101,0,131,128,14,28,7,9,2,2,31,77,97,105,110,32,77,
101,110,117,0,166,10,128,6,28,7,57,35,133,31,66,75,71,68,32,83,
116,111,112,0,31,66,75,71,68,32,82,117,110,0,5,0,130,71,7,59,
67,14,62,131,81,52,40,14,2,17,2,31,71,114,97,112,104,0,169,129,
37,82,128,27,64,17,77,97,105,110,32,80,97,103,101,0,131,81,33,40,
14,2,17,2,31,83,104,117,110,116,115,0,154,131,81,14,40,14,2,17,
2,31,82,97,119,32,77,101,116,101,114,0,106,14,0,130,20,47,158,16,
30,35,130,20,63,158,28,30,176,131,81,99,40,14,2,77,2,31,77,97,
105,110,32,77,101,110,117,0,166,129,45,1,112,12,64,78,83,104,117,110,
116,32,65,109,112,115,32,82,101,97,100,105,110,103,0,67,43,16,90,25,
78,2,24,4,129,141,52,22,8,64,17,79,104,109,115,0,129,141,67,32,
8,64,17,70,83,32,65,109,112,115,0,129,141,81,18,8,64,17,86,92,
47,70,83,0,129,25,52,53,8,64,17,82,101,115,105,115,116,111,114,32,
86,97,108,117,101,58,0,7,86,50,47,11,78,64,2,26,7,7,86,65,
47,11,78,64,2,26,1,7,86,78,47,11,78,64,2,26,4,129,29,74,
49,8,64,17,83,104,117,110,116,32,86,97,108,117,101,115,58,0,129,133,
20,14,21,64,78,65,0,3,0,67,4,32,192,41,106,31,1,7,129,56,
3,88,12,64,17,82,97,119,32,77,101,116,101,114,32,82,101,97,100,0,
131,79,91,40,14,2,17,2,31,77,97,105,110,32,77,101,110,117,0,166 };
// this structure defines all the variables and events of your control interface
struct {
// input variables
uint8_t page_graph; // =1 if page is visible, else =0, from 0 to 1
uint8_t page_main; // =1 if page is visible, else =0, from 0 to 1
uint8_t page_shunt; // =1 if page is visible, else =0, from 0 to 1
uint8_t page_raw; // =1 if page is visible, else =0, from 0 to 1
uint8_t resetButton; // =1 if button pressed, else =0, from 0 to 1
int32_t editDate_01; // days since the Unix Epoch (Jan 1 1970)
int32_t editTime_01; // milliseconds since midnight, from 0 to 86399000
char uNumber[11]; // string UTF8 end zero
uint8_t SaveButton; // =1 if button pressed, else =0, from 0 to 1
uint8_t BkgdSwitch; // =1 if state is ON, else =0, from 0 to 1
float shuntResistorInput;
float shuntAmpInput;
float shuntVoltInput;
// output variables
float meterReading;
float liveReading;
float maxReading;
float minReading;
float shuntReading;
float rawMeter;
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////After adding Real Time (note connect-flag gets removed at the bottom):
/*
-- HP Meter Graph 7 --
To compile this code using RemoteXY library 4.1.8 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.18.03 or later version;
- for iOS 1.14.1 or later version;
To interact with the GUI, please refer to the manual:
https://remotexy.com/ru/help/code/interaction/
This source code was automatically generated by the RemoteXY editor and
is an example for the RemoteXY library.
Licensed under the MIT License. See the LICENSE file in the RemoteXY library
root (https://github.com/RemoteXY/RemoteXY-Arduino-library) for full license
details.
*/
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// you can enable debug logging to Serial at 115200
//#define REMOTEXY__DEBUGLOG
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__HARDSERIAL
// RemoteXY connection settings
#define REMOTEXY_SERIAL Serial2
#define REMOTEXY_SERIAL_SPEED 115200
#define REMOTEXY_ACCESS_PASSWORD "1234"
#include <RemoteXY.h>
// RemoteXY GUI configuration
#pragma pack(push, 1)
uint8_t const PROGMEM RemoteXY_CONF_PROGMEM[] = // 650 bytes V21
{ 254,38,0,24,0,1,0,0,0,127,2,21,0,0,0,72,80,32,77,101,
116,101,114,32,66,117,100,100,121,0,24,1,200,116,4,2,3,2,2,21,
0,68,1,23,198,91,49,25,36,86,111,108,116,115,0,67,161,11,31,12,
78,36,24,3,67,23,14,22,8,78,36,24,3,67,69,14,22,8,78,36,
24,3,1,99,14,28,7,9,9,31,82,101,115,101,116,32,77,105,110,92,
47,77,97,120,0,14,6,6,26,7,77,1,94,26,13,33,6,27,7,77,
7,94,26,7,61,6,37,7,69,64,31,12,11,129,63,1,32,5,64,17,
80,67,73,32,85,32,78,117,109,98,101,114,0,129,15,1,11,5,64,17,
68,97,116,101,0,129,40,1,12,5,64,17,84,105,109,101,0,129,162,2,
34,6,64,17,76,105,118,101,32,82,101,97,100,105,110,103,0,129,192,13,
6,8,64,80,86,0,129,55,15,14,7,64,17,77,105,110,58,0,129,6,
15,16,7,64,17,77,97,120,58,0,129,45,16,4,5,64,66,86,0,129,
92,16,4,5,64,66,86,0,1,99,6,28,7,9,3,133,83,97,118,101,
32,84,111,32,70,105,108,101,0,131,128,14,28,7,9,2,2,31,77,97,
105,110,32,77,101,110,117,0,166,10,128,6,28,7,57,35,133,31,66,75,
71,68,32,83,116,111,112,0,31,66,75,71,68,32,82,117,110,0,193,43,
59,20,20,3,5,0,130,71,7,59,67,14,62,131,81,52,40,14,2,17,
2,31,71,114,97,112,104,0,169,129,37,82,128,27,64,17,77,97,105,110,
32,80,97,103,101,0,131,81,33,40,14,2,17,2,31,83,104,117,110,116,
115,0,154,131,81,14,40,14,2,17,2,31,82,97,119,32,77,101,116,101,
114,0,106,14,0,130,20,47,158,16,30,35,130,20,63,158,28,30,176,131,
81,99,40,14,2,77,2,31,77,97,105,110,32,77,101,110,117,0,166,129,
45,1,112,12,64,78,83,104,117,110,116,32,65,109,112,115,32,82,101,97,
100,105,110,103,0,67,43,16,90,25,78,2,24,4,129,141,52,22,8,64,
17,79,104,109,115,0,129,141,67,32,8,64,17,70,83,32,65,109,112,115,
0,129,141,81,18,8,64,17,86,92,47,70,83,0,129,25,52,53,8,64,
17,82,101,115,105,115,116,111,114,32,86,97,108,117,101,58,0,7,86,50,
47,11,78,64,2,26,7,7,86,65,47,11,78,64,2,26,1,7,86,78,
47,11,78,64,2,26,4,129,29,74,49,8,64,17,83,104,117,110,116,32,
86,97,108,117,101,115,58,0,129,133,20,14,21,64,78,65,0,3,0,67,
4,32,192,41,106,31,1,7,129,56,3,88,12,64,17,82,97,119,32,77,
101,116,101,114,32,82,101,97,100,0,131,79,91,40,14,2,17,2,31,77,
97,105,110,32,77,101,110,117,0,166 };
// this structure defines all the variables and events of your control interface
struct {
// input variables
uint8_t page_graph; // =1 if page is visible, else =0, from 0 to 1
uint8_t page_main; // =1 if page is visible, else =0, from 0 to 1
uint8_t page_shunt; // =1 if page is visible, else =0, from 0 to 1
uint8_t page_raw; // =1 if page is visible, else =0, from 0 to 1
uint8_t resetButton; // =1 if button pressed, else =0, from 0 to 1
int32_t editDate_01; // days since the Unix Epoch (Jan 1 1970)
int32_t editTime_01; // milliseconds since midnight, from 0 to 86399000
char uNumber[11]; // string UTF8 end zero
uint8_t SaveButton; // =1 if button pressed, else =0, from 0 to 1
uint8_t BkgdSwitch; // =1 if state is ON, else =0, from 0 to 1
float shuntResistorInput;
float shuntAmpInput;
float shuntVoltInput;
// output variables
float meterReading;
float liveReading;
float maxReading;
float minReading;
float shuntReading;
float rawMeter;
// complex variables
RemoteXYType_RealTime realTime_01; // use .getTimeStamp(), .getTime()
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////