Is it necessary to add RemoteXY_Handler() or yield() ?

Thanks.

In file included from C:\Users\marek\OneDrive\Dokumenty\Arduino\libraries\ESP32_BLE_Arduino\src/BLEAdvertising.h:15,
                 from C:\Users\marek\OneDrive\Dokumenty\Arduino\libraries\ESP32_BLE_Arduino\src/BLEServer.h:19,
                 from C:\Users\marek\OneDrive\Dokumenty\Arduino\libraries\ESP32_BLE_Arduino\src/BLEDevice.h:18,
                 from X:\Arduino\ESP32\Pokus_1\project\project.ino:28:
C:\Users\marek\OneDrive\Dokumenty\Arduino\libraries\ESP32_BLE_Arduino\src/FreeRTOS.h:61:35: error: 'ringbuf_type_t' has not been declared
   61 |         Ringbuffer(size_t length, ringbuf_type_t type = RINGBUF_TYPE_NOSPLIT);
      |                                   ^~~~~~~~~~~~~~
In file included from C:\Users\marek\OneDrive\Dokumenty\Arduino\libraries\RemoteXY\src/RemoteXY.h:158,
                 from X:\Arduino\ESP32\Pokus_1\project\project.ino:34:
C:\Users\marek\OneDrive\Dokumenty\Arduino\libraries\RemoteXY\src/RemoteXYStream_BLEDevice.h: In member function 'virtual void CRemoteXYStream_BLEDevice::onWrite(BLECharacteristic*)':
C:\Users\marek\OneDrive\Dokumenty\Arduino\libraries\RemoteXY\src/RemoteXYStream_BLEDevice.h:111:47: error: conversion from 'std::string' {aka 'std::__cxx11::basic_string<char>'} to non-scalar type 'String' requested
  111 |     String rxValue = pCharacteristic->getValue();
      |                      ~~~~~~~~~~~~~~~~~~~~~~~~~^~
Multiple libraries were found for "BLEDevice.h"
  Used: C:\Users\marek\OneDrive\Dokumenty\Arduino\libraries\ESP32_BLE_Arduino
  Not used: C:\Users\marek\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.2\libraries\BLE
exit status 1

Compilation error: exit status 1

Could someone help me?

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// you can enable debug logging to Serial at 115200
//#define REMOTEXY__DEBUGLOG    

// RemoteXY select connection mode and include library 
#define REMOTEXY_MODE__ESP32CORE_BLE

#include <BLEDevice.h>

// RemoteXY connection settings 
#define REMOTEXY_BLUETOOTH_NAME "RemoteXY"

#include <RemoteXY.h>

// RemoteXY GUI configuration  
#pragma pack(push, 1)  
uint8_t RemoteXY_CONF[] =   // 43 bytes
  { 255,2,0,0,0,36,0,17,0,0,0,4,1,106,200,1,1,2,0,1,
  30,29,50,50,0,2,31,226,173,161,0,1,31,101,48,48,0,2,31,226,
  173,163,0 };
  
// this structure defines all the variables and events of your control interface 
struct {
    // input variables
  uint8_t button_forward; // =1 if button pressed, else =0
  uint8_t button_backward; // =1 if button pressed, else =0
    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;   
#pragma pack(pop)
 
/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

#define DIR_PIN 12
#define STEP_PIN 14
#define ENABLE_PIN 26 // optional
int flag = HIGH;

void setup() 
{
  RemoteXY_Init (); 
  pinMode(DIR_PIN, OUTPUT);
  pinMode(STEP_PIN, OUTPUT);
  pinMode(ENABLE_PIN, OUTPUT);
  digitalWrite(ENABLE_PIN, LOW); // Enable the stepper driver
  // TODO your setup code
}

void stepMotor(int dir) {
  digitalWrite(DIR_PIN, dir);
  for (int x = 0; x < 200; x++) {
    digitalWrite(STEP_PIN, HIGH);
    delayMicroseconds(1000); // Adjust delay for speed control
    digitalWrite(STEP_PIN, LOW);
    delayMicroseconds(1000); // Adjust delay for speed control
  }
}

void loop() 
{ 
//  check rotation without remotexy library --> it works properly
//  if (flag == HIGH) {
//    digitalWrite(DIR_PIN, LOW);
//    for (int x = 0; x < 3200; x++) { //full revolution by 1/16 step
//      digitalWrite(STEP_PIN, HIGH);
//      delayMicroseconds(1000); // Adjust delay for speed control
//      digitalWrite(STEP_PIN, LOW);
//      delayMicroseconds(1000); // Adjust delay for speed control
//    }
//    flag = LOW;
//  }
  
  RemoteXY_Handler (); 
  if (RemoteXY.button_forward) {
     stepMotor(HIGH); // Move forward
  }
  if (RemoteXY.button_backward) {
    stepMotor(LOW); // Move backward
  }
}

Best regards

How can I show an element on multiple pages with the new page style?

With the old style, I was able to show an element on multiple pages. But now I cannot figure it out.

"In file included from C:\Users\Vikuro\AppData\Local\Temp\.arduinoIDE-unsaved202454-10324-13je2w5.zbk9\sketch_jun4b\sketch_jun4b.ino:11:
C:\Users\Vikuro\AppData\Local\Temp\.arduinoIDE-unsaved202454-10324-13je2w5.zbk9\sketch_jun4b\sketch_jun4b.ino: In function 'void setup()':
c:\Users\Vikuro\Documents\Arduino\libraries\RemoteXY\src/RemoteXY.h:208:122: error: expected type-specifier before 'CRemoteXYComm_WiFiPoint'
  208 |   #define RemoteXY_Init() remotexy = new CRemoteXY (RemoteXY_CONF_PROGMEM, &RemoteXY, new CRemoteXYConnectionServer (new CRemoteXYComm_WiFiPoint (REMOTEXY_WIFI_SSID, REMOTEXY_WIFI_PASSWORD), REMOTEXY_SERVER_PORT), REMOTEXY_ACCESS_PASSWORD)
      |                                                                                                                          ^~~~~~~~~~~~~~~~~~~~~~~
C:\Users\Vikuro\AppData\Local\Temp\.arduinoIDE-unsaved202454-10324-13je2w5.zbk9\sketch_jun4b\sketch_jun4b.ino:42:3: note: in expansion of macro 'RemoteXY_Init'
   42 |   RemoteXY_Init ();
      |   ^~~~~~~~~~~~~

exit status 1

Compilation error: exit status 1"

Any help what any of this means? i'm not an expert, its my first project using Remotexy
When i removed RemoteXY_Init (), it did compile but i couldn't connect to Wifi.

lib\RemoteXY/RemoteXY2.h:196:122: error: expected type-specifier before 'CRemoteXYComm_WiFi'
  196 |   #define RemoteXY_Init() remotexy = new CRemoteXY (RemoteXY_CONF_PROGMEM, &RemoteXY, new CRemoteXYConnectionServer (new CRemoteXYComm_WiFi (REMOTEXY_WIFI_SSID, REMOTEXY_WIFI_PASSWORD), REMOTEXY_SERVER_PORT), REMOTEXY_ACCESS_PASSWORD)

I am attempting to compile this for an ESP8266 using WiFi communication (via a network).  If I look at the instance of
CRemoteXYConnectionServer (CRemoteXYComm * _comm, uint16_t _port = 0)
It looks like it is expecting something "different" than the CRRemoteXYComm_WiFi.

I have attempted this with various Library versions (both from PlatformIO and GitHub and this site) - and no difference. 
I may be missing something silly - but at this point I am at a loss.  Note:  I also used the alternative code that exists in other examples

    // remotexy = new CRemoteXY(
    //     RemoteXY_CONF_PROGMEM,
    //     &RemoteXY,
    //     new CRemoteXYConnectionServer(
    //        new CRemoteXYComm_WiFi(
    //           SSID1, // REMOTEXY_WIFI_SSID
    //           PSK1), // REMOTEXY_WIFI_PASSWORD
    //        6377        // REMOTEXY_SERVER_PORT
    //        ));

It has the same failure.

Thanks

NEVER MIND:  After playing with the LIBRARY files - and recoding some of it - I got it to compile and function.  This is a fact I have found happens alot with code built for ArduinoIDE vs VSCode.   IMHO - the Arduino does not follow strict C / C++ development requirements (one of the reasons I dont use it).
Anyway - it is compiling - and basically running.  Still need to reworkd the WiFi code (want to use a static addr) - but that is simply one of "my things".

Thanks

#define REMOTEXY_WIFI_SSID "ssid"
#define REMOTEXY_WIFI_PASSWORD "password"

Then this connects to the wifi:-

  RemoteXY_Init ();

Is there any way to give RemoteXY different SSIDs and passwords so we can change wifi network, eg:-

RemoteXY_Init ( "SSID2", "PASSWORD2" );

I have some internal numeric variables, both integer and float, that I need to convert into the char arrays used by the RemoteXY interface and GUI.

I know it should be easy enough to do, but getting so much confusing information on the web, it's mashing my brain....

Example of my RemoteXY declarations, which should enable me to convert any of the other numbers, are:-

char totalmins[9]; : This needs to be converted from my internal variable  uint16_t   totalmins;
char cost[6]; :  This to be converted from float  cost; and to display  ###.## format.

If someone could explain how to do this, it will bump me up the learning curve, and I'd be extremely grateful....

TIA

I was wondering if there any way to get the free version à remoteXY ? It does not appear anymore on the playstore, only the pro version.

Does anyone have any information about this ?

thx in advance for your answer.

I cannot find any such thing for the indication elements, I have worked my way through all of them, none can be allocated to a pin. Is this something that is possible or are these indication elements just for stuff happening on your phone, for example: showing which way your phone is pointing?

thanks

c:\Users\onedn\Documents\Arduino\libraries\RemoteXY\src/RemoteXYStream_BLEDevice.h: In member function 'virtual void CRemoteXYStream_BLEDevice::onWrite(BLECharacteristic*)':
c:\Users\onedn\Documents\Arduino\libraries\RemoteXY\src/RemoteXYStream_BLEDevice.h:111:56: error: conversion from 'String' to non-scalar type 'std::string' {aka 'std::__cxx11::basic_string<char>'} requested
  111 |         std::string rxValue = pCharacteristic->getValue();