#include <Pushsafer.h>
#define REMOTEXY_MODE__ESP8266WIFI_LIB_CLOUD
#include <ESP8266WiFi.h>
#include <ArduinoJson.h>
#include <RemoteXY.h>
#include <WiFiClient.h>
#include <Pushsafer.h>

#define PushsaferKey "The Key"
char ssid [] = "My SSID";
char password [] = "My pass";
WiFiClient client;
Pushsafer pushsafer(PushsaferKey, client);

// RemoteXY connection settings 
#define REMOTEXY_WIFI_SSID "My SSID"
#define REMOTEXY_WIFI_PASSWORD "My pass"
#define REMOTEXY_CLOUD_SERVER "cloud.remotexy.com"
#define REMOTEXY_CLOUD_PORT 6376
#define REMOTEXY_CLOUD_TOKEN "My Token"





// RemoteXY configurate  
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
  { 255,3,0,0,0,52,0,10,177,1,
  130,2,1,1,61,98,26,2,0,8,
  20,22,11,2,26,31,31,79,78,0,
  79,70,70,0,2,0,34,20,22,11,
  2,26,31,31,79,78,0,79,70,70,
  0,3,131,6,38,51,19,2,26 };
  
// this structure defines all the variables and events of your control interface 
struct {

    // input variables
  uint8_t switch_1; // =1 if switch ON and =0 if OFF 
  uint8_t switch_2; // =1 if switch ON and =0 if OFF 
  uint8_t select_1; // =0 if select position A, =1 if position B, =2 if position C, ... 

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0 

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

#define PIN_SWITCH_1 D6
#define PIN_SWITCH_2 D7


void setup() 
{
  RemoteXY_Init (); 
  
  pinMode (PIN_SWITCH_1, OUTPUT);
  pinMode (PIN_SWITCH_2, OUTPUT);
  
  pushsafer.debug = true;

  // Take a look at the Pushsafer.com API at
  // https://www.pushsafer.com/en/pushapi
  
  struct PushSaferInput input;
  input.message = "Water overflow";
  input.title = "Warning";
  input.sound = "8";
  input.vibration = "2";
  input.icon = "2";
  input.iconcolor = "#FFCCCC";
  input.priority = "1";
  input.device = "28458";
  input.url = "https://www.pushsafer.com";
  input.urlTitle = "Open Pushsafer.com";
  input.picture = "";
  input.picture2 = "";
  input.picture3 = "";
  input.time2live = "";
  input.retry = "";
  input.expire = "";
  input.answer = "";

  Serial.println(pushsafer.sendEvent(input));
  Serial.println("Sent");
  
}

void loop() 
{ 
  RemoteXY_Handler ();
  
  digitalWrite(PIN_SWITCH_1, (RemoteXY.switch_1==0)?LOW:HIGH);
  digitalWrite(PIN_SWITCH_2, (RemoteXY.switch_2==0)?LOW:HIGH);
  
  if (digitalRead(D7) == HIGH) // if pin 7 enjoyed a high level voltage
    RemoteXY.select_1 = 0;
  else                        // else
    RemoteXY.select_1 = 2;
    
  if (digitalRead(D6) == HIGH) // if pin 6 enjoyed a high level voltage
    RemoteXY.select_1 = 1;
  else                        // else
    RemoteXY.select_1 = 2;

}