/*
-- 8 relay switch by sanoop --
This source code of graphical user interface
has been generated automatically by RemoteXY editor.
To compile this code using RemoteXY library 2.4.3 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.5.1 or later version;
- for iOS 1.4.1 or later version;
This source code is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
*///////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266WIFI_LIB
#include <ESP8266WiFi.h>
#include <RemoteXY.h>
// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "Asianet_Broadband@sanoop"
#define REMOTEXY_WIFI_PASSWORD "navani484"
#define REMOTEXY_SERVER_PORT 6377
// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255,2,0,0,0,134,0,10,30,1,
130,1,0,28,65,50,203,129,0,4,
7,60,5,1,72,65,76,76,32,47,
84,86,47,32,83,85,66,32,67,79,
78,84,82,79,108,0,129,0,14,17,
32,6,204,49,57,50,46,49,54,56,
46,48,46,53,0,130,1,2,30,59,
46,208,2,0,30,34,22,11,36,8,
31,31,79,78,0,79,70,70,0,2,
0,30,55,22,11,36,8,31,31,79,
78,0,79,70,70,0,130,1,6,32,
20,20,140,129,0,12,38,8,6,247,
84,86,0,130,1,6,53,20,18,154,
129,0,11,58,11,6,15,115,117,98,
0 };
// this structure defines all the variables and events of your control interface
struct {
// input variables
uint8_t switch_1; // =1 if switch ON and =0 if OFF
uint8_t switch_2; // =1 if switch ON and =0 if OFF
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#define PIN_SWITCH_1 D4
#define PIN_SWITCH_2 D3
void setup()
{
Serial.begin(115200); // Start the serial monitor.
delay(20); // Give it a moment.
// Connect to WiFi network:
Serial.println("Connect to WiFi network");
IPAddress ip(192, 168, 0, 5);
IPAddress gateway(192, 168, 0, 1);
IPAddress subnet(255, 255, 255, 0);
IPAddress dns(192, 168, 0, 1);
WiFi.config(ip,dns,gateway,subnet);
Serial.println("wifi Asianet_Broadband@sanoop ");
Serial.println("ip IPAddress 192.168.0.5 ");
WiFi.begin(REMOTEXY_WIFI_SSID, REMOTEXY_WIFI_PASSWORD);
RemoteXY_Init ();
pinMode (PIN_SWITCH_1, OUTPUT);
pinMode (PIN_SWITCH_2, OUTPUT);
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
digitalWrite(PIN_SWITCH_1, (RemoteXY.switch_1==0)?HIGH:LOW);
digitalWrite(PIN_SWITCH_2, (RemoteXY.switch_2==0)?HIGH:LOW);
// TODO you loop code
// use the RemoteXY structure for data transfer
// do not call delay()
}
]]>
upload picscertificity.com