//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// To switch from BLE and classic Bluetooth.
#define BLE

#ifdef BLE

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP32CORE_BLE
#include <BLEDevice.h>

#else

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP32CORE_BLUETOOTH
#include <BluetoothSerial.h>

#endif

#define REMOTEXY__DEBUGLOG

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_BLUETOOTH_NAME "RemoteXY"
// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
  { 255,4,0,0,0,28,0,13,13,1,
  6,0,9,39,45,45,2,26,2,1,
  21,15,22,11,2,26,31,31,79,78,
  0,79,70,70,0 };

// this structure defines all the variables and events of your control interface
struct {

    // input variables
  uint8_t rgb_1_r; // =0..255 Red color value
  uint8_t rgb_1_g; // =0..255 Green color value
  uint8_t rgb_1_b; // =0..255 Blue color value
  uint8_t switch_1; // =1 if switch ON and =0 if OFF

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)


/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

void setup()
{
  RemoteXY_Init ();
}

void loop()
{
  RemoteXY_Handler ();

  /*
  Serial.print("On: ");
  Serial.print(RemoteXY.switch_1);
  Serial.print(" ; R: ");
  Serial.print(RemoteXY.rgb_1_r);
  Serial.print(" ; G: ");
  Serial.print(RemoteXY.rgb_1_g);
  Serial.print(" ; B: ");
  Serial.println(RemoteXY.rgb_1_b);
*/
}