// input variables
uint8_t button_1; // =1 если кнопка нажата, иначе =0 And button_1 is the reference used in the rest of the code.
But in your "combined" code you have it as this...
// input variables
uint8_t button_0; // =1 если кнопка нажата, иначе =0 #define LED 5 // D1(gpio5)
#define BUTTON 4 //D2(gpio4)
//Let's say you have your push button on pin 4
int switchState = 0; // actual read value from pin4
int oldSwitchState = 0; // last read value from pin4
int lightsOn = 0; // is the switch on = 1 or off = 0
void setup() {
pinMode(BUTTON, INPUT); // push button
pinMode(LED, OUTPUT); // anything you want to control using a switch e.g. a Led
}
void loop() {
switchState = digitalRead(BUTTON); // read the pushButton State
if (switchState != oldSwitchState) // catch change
{
oldSwitchState = switchState;
if (switchState == HIGH)
{
// toggle
lightsOn = !lightsOn;
}
}
if(lightsOn)
{
digitalWrite(LED, HIGH); // set the LED on
} else {
digitalWrite(LED, LOW); // set the LED off
}
}Скачанный скетч
/*
-- New project --
This source code of graphical user interface
has been generated automatically by RemoteXY editor.
To compile this code using RemoteXY library 3.1.6 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.8.01 or later version;
- for iOS 1.5.1 or later version;
This source code is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
*/
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// определение режима соединения и подключение библиотеки RemoteXY
#define REMOTEXY_MODE__ESP8266WIFI_LIB
#include <ESP8266WiFi.h>
#include <RemoteXY.h>
// настройки соединения
#define REMOTEXY_WIFI_SSID "HOTBOX 4-7EA8"
#define REMOTEXY_WIFI_PASSWORD "0507769926"
#define REMOTEXY_SERVER_PORT 6377
// конфигурация интерфейса
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255,1,0,1,0,23,0,13,13,1,
70,32,43,7,9,9,26,37,135,0,
1,0,19,6,12,12,2,31,88,0 };
// структура определяет все переменные и события вашего интерфейса управления
struct {
// input variables
uint8_t button_1; // =1 если кнопка нажата, иначе =0
// output variables
uint8_t led_1; // led state 0 .. 2
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#define PIN_BUTTON_1 D2
void setup()
{
RemoteXY_Init ();
pinMode (PIN_BUTTON_1, OUTPUT);
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
digitalWrite(PIN_BUTTON_1, (RemoteXY.button_1==0)?LOW:HIGH);
// TODO you loop code
// используйте структуру RemoteXY для передачи данных
// не используйте функцию delay()
}Попробовал совместить
/* -- New project --
This source code of graphical user interface
has been generated automatically by RemoteXY editor.
To compile this code using RemoteXY library 3.1.6 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.8.01 or later version;
- for iOS 1.5.1 or later version;
This source code is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
*/
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// определение режима соединения и подключение библиотеки RemoteXY
#define REMOTEXY_MODE__ESP8266WIFI_LIB
#include <ESP8266WiFi.h>
#include <RemoteXY.h>
// настройки соединения
#define REMOTEXY_WIFI_SSID "HOTBOX 4-7EA8"
#define REMOTEXY_WIFI_PASSWORD "0507769926"
#define REMOTEXY_SERVER_PORT 6377
// конфигурация интерфейса
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255,1,0,1,0,23,0,13,13,1,
70,32,43,7,9,9,26,37,135,0,
1,0,19,6,12,12,2,31,88,0 };
// структура определяет все переменные и события вашего интерфейса управления
struct {
// input variables
uint8_t button_0; // =1 если кнопка нажата, иначе =0
// output variables
uint8_t led_1; // led state 0 .. 2
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
#define PIN_BUTTON_1 D2
#define LED 5 // D1(gpio5)
#define BUTTON 4 //D2(gpio4)
//Let's say you have your push button on pin 4
int switchState = 0; // actual read value from pin4
int oldSwitchState = 0; // last read value from pin4
int lightsOn = 0; // is the switch on = 1 or off = 0
void setup() {
RemoteXY_Init ();
pinMode(BUTTON, INPUT); // push button
pinMode(LED, OUTPUT); // anything you want to control using a switch e.g. a Led
}
void loop() {
RemoteXY_Handler ();
digitalWrite(PIN_BUTTON_1, (RemoteXY.button_1==0)?LOW:HIGH);
switchState = digitalRead(BUTTON); // read the pushButton State
if (switchState != oldSwitchState) // catch change
{
oldSwitchState = switchState;
if (switchState == HIGH)
{
// toggle
lightsOn = !lightsOn;
}
}
if(lightsOn)
{
digitalWrite(LED, LOW); // set the LED on
} else {
digitalWrite(LED, HIGH); // set the LED off
}
}и получил такую ошибку
'struct<unnamed>' has no member named 'button_1'; did you mean 'button_0'?
Где искать эту ошибку?
Спасибо.
]]>