<![CDATA[RemoteXY community — Cannot compile; error: expected type-specifier before 'CRemoteXYStream]]> 2023-10-30T02:52:02Z PunBB https://forum.remotexy.com/viewtopic.php?id=1653 <![CDATA[Re: Cannot compile; error: expected type-specifier before 'CRemoteXYStream]]> vBiggles wrote:

I'm brand new to RemoteXY, I thought I'd try it out with an ESP8266 relay board and an HC-05.

I've set the board to Generic ESP8266 and added RemoteXY library however if I use SOFTWARESERIAL I get the following error, if I use HARDWARESERIAL it compiles fine.

If I set the board to an Arduino board it doesn't compile and presents the same error, which leads me to think it's something with my environment rather than a systemic issue or bug.  I'm hoping I could get some suggestions here?

Here's my code, the operational parts (relay on/off) aren't complete;

/*
   -- New project --
   
   This source code of graphical user interface 
   has been generated automatically by RemoteXY editor.
   To compile this code using RemoteXY library 3.1.8 or later version 
   download by link http://remotexy.com/en/library/
   To connect using RemoteXY mobile app by link http://remotexy.com/en/download/                   
     - for ANDROID 4.11.1 or later version;
     - for iOS 1.9.1 or later version;
    
   This source code is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.    
*/

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library 
#define REMOTEXY_MODE__SOFTWARESERIAL
#include <SoftwareSerial.h>
#include <RemoteXY.h>

// RemoteXY connection settings 
#define REMOTEXY_SERIAL_RX D1
#define REMOTEXY_SERIAL_TX D2
#define REMOTEXY_SERIAL_SPEED 9600


// RemoteXY configurate  
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =   // 78 bytes
  { 255,4,0,0,0,71,0,16,31,1,2,0,33,9,22,11,2,26,31,31,
  79,78,0,79,70,70,0,2,0,33,23,22,11,2,26,31,31,79,78,0,
  79,70,70,0,2,0,33,36,22,11,2,26,31,31,79,78,0,79,70,70,
  0,2,0,33,50,22,11,2,26,31,31,79,78,0,79,70,70,0 };
  
// this structure defines all the variables and events of your control interface 
struct {

    // input variables
  uint8_t switch_1; // =1 if switch ON and =0 if OFF 
  uint8_t switch_2; // =1 if switch ON and =0 if OFF 
  uint8_t switch_3; // =1 if switch ON and =0 if OFF 
  uint8_t switch_4; // =1 if switch ON and =0 if OFF 

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0 

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

#define RELAY_1 13
#define RELAY_2 14
#define RELAY_3 15
#define RELAY_4 16

void setup() 
{
  RemoteXY_Init (); 
  
  
  // TODO you setup code
  
}

void loop() 
{ 
  RemoteXY_Handler ();
  
  digitalWrite(RELAY_1, (RemoteXY.switch_1==0)?LOW:HIGH);

  // TODO you loop code
  // use the RemoteXY structure for data transfer
  // do not call delay() 


}

Here's the error;

In file included from C:\Users\mswin\AppData\Local\Temp\Temp1_project-2023-04-26-09-13-42.zip\project\project.ino:25:
C:\Users\mswin\AppData\Local\Temp\Temp1_project-2023-04-26-09-13-42.zip\project\project.ino: In function 'void setup()':
c:\Users\mswin\Documents\Arduino\libraries\RemoteXY\src/RemoteXY.h:166:117: error: expected type-specifier before 'CRemoteXYStream_SoftSerial'
  166 |   #define RemoteXY_Init() remotexy = new CRemoteXY (RemoteXY_CONF_PROGMEM, &RemoteXY, REMOTEXY_ACCESS_PASSWORD, new CRemoteXYStream_SoftSerial (REMOTEXY_SERIAL_RX, REMOTEXY_SERIAL_TX, REMOTEXY_SERIAL_SPEED))
      |                                                                                                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\mswin\AppData\Local\Temp\Temp1_project-2023-04-26-09-13-42.zip\project\project.ino:67:3: note: in expansion of macro 'RemoteXY_Init'
   67 | 
      |   ^            

exit status 1

Compilation error: exit status 1

Where you able to resolved this issue? I have a esp32 and I am getting same error but cannot fix it.

]]> https://forum.remotexy.com/profile.php?id=2574 2023-10-30T02:52:02Z https://forum.remotexy.com/viewtopic.php?pid=5238#p5238 <![CDATA[Re: Cannot compile; error: expected type-specifier before 'CRemoteXYStream]]> I changed the esp8266 version installed from 3.1.2 to an earlier version 2.5.2 and the failure was gone

]]> https://forum.remotexy.com/profile.php?id=2504 2023-07-29T17:43:16Z https://forum.remotexy.com/viewtopic.php?pid=5162#p5162 <![CDATA[Re: Cannot compile; error: expected type-specifier before 'CRemoteXYStream]]> Recently I've been having the same problem.

I modified the interface but after cutting and pasting I got this error. I have tried to update but the problem persists.

Edit: I'm such an idiot... I had the wrong board selected in the configuration part of the RemoteXY editor.

]]> https://forum.remotexy.com/profile.php?id=2453 2023-05-08T08:27:46Z https://forum.remotexy.com/viewtopic.php?pid=5119#p5119 <![CDATA[Cannot compile; error: expected type-specifier before 'CRemoteXYStream]]> I'm brand new to RemoteXY, I thought I'd try it out with an ESP8266 relay board and an HC-05.

I've set the board to Generic ESP8266 and added RemoteXY library however if I use SOFTWARESERIAL I get the following error, if I use HARDWARESERIAL it compiles fine.

If I set the board to an Arduino board it doesn't compile and presents the same error, which leads me to think it's something with my environment rather than a systemic issue or bug.  I'm hoping I could get some suggestions here?

Here's my code, the operational parts (relay on/off) aren't complete;

/*
   -- New project --
   
   This source code of graphical user interface 
   has been generated automatically by RemoteXY editor.
   To compile this code using RemoteXY library 3.1.8 or later version 
   download by link http://remotexy.com/en/library/
   To connect using RemoteXY mobile app by link http://remotexy.com/en/download/                   
     - for ANDROID 4.11.1 or later version;
     - for iOS 1.9.1 or later version;
    
   This source code is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.    
*/

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library 
#define REMOTEXY_MODE__SOFTWARESERIAL
#include <SoftwareSerial.h>
#include <RemoteXY.h>

// RemoteXY connection settings 
#define REMOTEXY_SERIAL_RX D1
#define REMOTEXY_SERIAL_TX D2
#define REMOTEXY_SERIAL_SPEED 9600


// RemoteXY configurate  
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =   // 78 bytes
  { 255,4,0,0,0,71,0,16,31,1,2,0,33,9,22,11,2,26,31,31,
  79,78,0,79,70,70,0,2,0,33,23,22,11,2,26,31,31,79,78,0,
  79,70,70,0,2,0,33,36,22,11,2,26,31,31,79,78,0,79,70,70,
  0,2,0,33,50,22,11,2,26,31,31,79,78,0,79,70,70,0 };
  
// this structure defines all the variables and events of your control interface 
struct {

    // input variables
  uint8_t switch_1; // =1 if switch ON and =0 if OFF 
  uint8_t switch_2; // =1 if switch ON and =0 if OFF 
  uint8_t switch_3; // =1 if switch ON and =0 if OFF 
  uint8_t switch_4; // =1 if switch ON and =0 if OFF 

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0 

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

#define RELAY_1 13
#define RELAY_2 14
#define RELAY_3 15
#define RELAY_4 16

void setup() 
{
  RemoteXY_Init (); 
  
  
  // TODO you setup code
  
}

void loop() 
{ 
  RemoteXY_Handler ();
  
  digitalWrite(RELAY_1, (RemoteXY.switch_1==0)?LOW:HIGH);

  // TODO you loop code
  // use the RemoteXY structure for data transfer
  // do not call delay() 


}

Here's the error;

In file included from C:\Users\mswin\AppData\Local\Temp\Temp1_project-2023-04-26-09-13-42.zip\project\project.ino:25:
C:\Users\mswin\AppData\Local\Temp\Temp1_project-2023-04-26-09-13-42.zip\project\project.ino: In function 'void setup()':
c:\Users\mswin\Documents\Arduino\libraries\RemoteXY\src/RemoteXY.h:166:117: error: expected type-specifier before 'CRemoteXYStream_SoftSerial'
  166 |   #define RemoteXY_Init() remotexy = new CRemoteXY (RemoteXY_CONF_PROGMEM, &RemoteXY, REMOTEXY_ACCESS_PASSWORD, new CRemoteXYStream_SoftSerial (REMOTEXY_SERIAL_RX, REMOTEXY_SERIAL_TX, REMOTEXY_SERIAL_SPEED))
      |                                                                                                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\mswin\AppData\Local\Temp\Temp1_project-2023-04-26-09-13-42.zip\project\project.ino:67:3: note: in expansion of macro 'RemoteXY_Init'
   67 | 
      |   ^            

exit status 1

Compilation error: exit status 1
]]> https://forum.remotexy.com/profile.php?id=2442 2023-04-26T21:32:08Z https://forum.remotexy.com/viewtopic.php?pid=5112#p5112