/*
   -- car project3 --
   
   This source code of graphical user interface
   has been generated automatically by RemoteXY editor.
   To compile this code using RemoteXY library 3.1.8 or later version
   download by link http://remotexy.com/en/library/
   To connect using RemoteXY mobile app by link http://remotexy.com/en/download/                   
     - for ANDROID 4.11.1 or later version;
     - for iOS 1.9.1 or later version;
   
   This source code is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.   
*/

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__SOFTSERIAL
#include <SoftwareSerial.h>

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_SERIAL_RX 2
#define REMOTEXY_SERIAL_TX 3
#define REMOTEXY_SERIAL_SPEED 9600

// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =   // 240 bytes
  { 255,9,0,0,0,233,0,16,97,1,10,49,3,6,28,14,4,1,31,32,
  72,111,116,32,87,97,116,101,114,32,0,31,72,111,116,32,87,97,116,101,
  114,0,10,49,33,6,28,14,4,1,31,32,32,32,72,101,97,116,101,114,
  32,32,32,0,31,72,101,97,116,101,114,0,10,113,3,22,28,14,4,1,
  31,79,117,116,115,105,100,101,32,76,105,103,104,116,0,31,10,49,33,22,
  28,14,4,1,31,32,32,32,32,79,118,101,110,32,32,32,32,0,31,79,
  118,101,110,0,10,113,3,38,28,14,4,1,31,82,101,97,114,32,76,105,
  103,104,116,0,31,10,113,33,38,27,14,4,1,31,84,101,110,116,32,76,
  105,103,104,116,0,31,10,49,3,54,28,15,4,1,31,32,32,32,32,32,
  85,83,66,32,32,32,32,32,0,31,85,83,66,0,10,49,33,54,27,15,
  4,1,31,32,32,32,32,80,117,109,112,32,32,32,32,0,31,80,117,109,
  112,0,10,112,23,78,18,18,4,1,31,65,108,108,32,79,102,102,0,31 };

// this structure defines all the variables and events of your control interface
struct {

    // input variables
  uint8_t pushSwitch_1; // =1 if state is ON, else =0
  uint8_t pushSwitch_2; // =1 if state is ON, else =0
  uint8_t pushSwitch_3; // =1 if state is ON, else =0
  uint8_t pushSwitch_4; // =1 if state is ON, else =0
  uint8_t pushSwitch_5; // =1 if state is ON, else =0
  uint8_t pushSwitch_6; // =1 if state is ON, else =0
  uint8_t pushSwitch_7; // =1 if state is ON, else =0
  uint8_t pushSwitch_8; // =1 if state is ON, else =0
  uint8_t pushSwitch_9; // =1 if state is ON, else =0

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

#define PIN_PUSHSWITCH_1 5
#define PIN_PUSHSWITCH_2 6
#define PIN_PUSHSWITCH_3 7
#define PIN_PUSHSWITCH_4 8
#define PIN_PUSHSWITCH_5 9
#define PIN_PUSHSWITCH_6 10
#define PIN_PUSHSWITCH_7 11
#define PIN_PUSHSWITCH_8 12

void setup()
{
  RemoteXY_Init ();

  pinMode (PIN_PUSHSWITCH_1, OUTPUT);
  pinMode (PIN_PUSHSWITCH_2, OUTPUT);
  pinMode (PIN_PUSHSWITCH_3, OUTPUT);
  pinMode (PIN_PUSHSWITCH_4, OUTPUT);
  pinMode (PIN_PUSHSWITCH_5, OUTPUT);
  pinMode (PIN_PUSHSWITCH_6, OUTPUT);
  pinMode (PIN_PUSHSWITCH_7, OUTPUT);
  pinMode (PIN_PUSHSWITCH_8, OUTPUT);

  // TODO you setup code

}

void loop()
{
  RemoteXY_Handler ();

  digitalWrite(PIN_PUSHSWITCH_1, (RemoteXY.pushSwitch_1==0)?LOW:HIGH);
  digitalWrite(PIN_PUSHSWITCH_2, (RemoteXY.pushSwitch_2==0)?LOW:HIGH);
  digitalWrite(PIN_PUSHSWITCH_3, (RemoteXY.pushSwitch_3==0)?LOW:HIGH);
  digitalWrite(PIN_PUSHSWITCH_4, (RemoteXY.pushSwitch_4==0)?LOW:HIGH);
  digitalWrite(PIN_PUSHSWITCH_5, (RemoteXY.pushSwitch_5==0)?LOW:HIGH);
  digitalWrite(PIN_PUSHSWITCH_6, (RemoteXY.pushSwitch_6==0)?LOW:HIGH);
  digitalWrite(PIN_PUSHSWITCH_7, (RemoteXY.pushSwitch_7==0)?LOW:HIGH);
  digitalWrite(PIN_PUSHSWITCH_8, (RemoteXY.pushSwitch_8==0)?LOW:HIGH);

  // TODO you loop code
  // use the RemoteXY structure for data transfer
  // do not call delay()

}