#include <ESP32_Servo.h>

//#include <ESP32_Servo.h>

/*
   -- its all good --
   
   This source code of graphical user interface
   has been generated automatically by RemoteXY editor.
   To compile this code using RemoteXY library 2.3.3 or later version
   download by link http://remotexy.com/en/library/
   To connect using RemoteXY mobile app by link http://remotexy.com/en/download/                   
     - for ANDROID 4.1.1 or later version;
     - for iOS 1.2.1 or later version;
   
   This source code is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.   
*/

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////
// RemoteXY select connection mode and include library

#define REMOTEXY_MODE__ESP8266WIFI_LIB_POINT  // possibly this is problem
#include <WiFi.h>

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "Aqua Force Unlimited"
#define REMOTEXY_WIFI_PASSWORD "binzer78"
#define REMOTEXY_SERVER_PORT 6377

// RemoteXY configurate 
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
  { 255,3,0,14,0,158,0,8,6,1,
  65,41,58,0,5,7,65,44,53,0,
  5,7,1,8,9,79,12,12,36,134,
  83,84,79,80,0,1,8,44,79,12,
  12,132,31,83,84,65,82,84,0,67,
  1,35,61,27,5,8,36,11,4,0,
  8,17,14,52,26,26,66,132,38,36,
  22,17,26,24,129,0,11,16,13,4,
  187,82,97,98,98,105,116,0,129,0,
  8,71,13,5,32,84,117,114,116,108,
  101,0,130,1,32,12,30,5,27,130,
  1,17,7,23,5,27,130,1,8,2,
  18,5,27,129,0,9,2,15,5,24,
  65,81,85,65,0,129,0,20,7,18,
  5,8,70,79,82,67,69,0,129,0,
  34,12,27,5,24,85,78,76,73,77,
  73,84,69,68,0 };
 
// this structure defines all the variables of your control interface
struct {

    // input variable
  uint8_t stp; // =1 if button pressed, else =0
  uint8_t strt; // =1 if button pressed, else =0
  int8_t IDLE1; // =0..100 slider position

    // output variable
  uint8_t strtled_b_b; // =0..255 LED Blue brightness
  uint8_t stpled_r_r; // =0..255 LED Red brightness
  char rpmText[11];  // string UTF8 end zero
  int8_t rpmLevel; // =0..100 level position

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////
Servo myservo;
#define PIN_STP 27
#define PIN_STRT 26
int servoPin =32;

void setup()
{
  RemoteXY_Init ();
myservo.attach(servoPin,500,2500);
  pinMode (PIN_STP, OUTPUT);
RemoteXY.IDLE1=0;
   pinMode (PIN_STRT, OUTPUT);

  // TODO you set/////////////////up code
}
void loop(){

 
  digitalWrite(PIN_STP, (RemoteXY.stp==0)?LOW:HIGH);
    RemoteXY.stpled_r_r = (digitalRead(27)==HIGH)?255:0;
  digitalWrite(PIN_STRT, (RemoteXY.strt==0)?LOW:HIGH);
    RemoteXY.strtled_b_b= (digitalRead(26)==HIGH)?255:0;
   int ms = RemoteXY.IDLE1*20+500; 
  myservo.writeMicroseconds(ms);
  // TODO you loop code
  // use the RemoteXY structure for data transfer
}

It's most likely a problem in your program.