-- New project --
   
   This source code of graphical user interface 
   has been generated automatically by RemoteXY editor.
   To compile this code using RemoteXY library 2.4.3 or later version 
   download by link http://remotexy.com/en/library/
   To connect using RemoteXY mobile app by link http://remotexy.com/en/download/                   
     - for ANDROID 4.3.1 or later version;
     - for iOS 1.3.5 or later version;
     
   This source code is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.     
*/

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library 
#define REMOTEXY_MODE__ESP8266_SOFTSERIAL_POINT
#include <SoftwareSerial.h>

#include <RemoteXY.h>

// RemoteXY connection settings 
#define REMOTEXY_SERIAL_RX 2
#define REMOTEXY_SERIAL_TX 3
#define REMOTEXY_SERIAL_SPEED 9600
#define REMOTEXY_WIFI_SSID "RemoteXY"
#define REMOTEXY_WIFI_PASSWORD "12345678"
#define REMOTEXY_SERVER_PORT 6377

// RemoteXY configurate   
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
  { 255,5,0,0,0,36,0,8,13,0,
  6,0,57,11,37,37,2,26,2,0,
  19,40,22,11,2,26,31,31,79,78,
  0,79,70,70,0,4,0,11,10,7,
  18,2,26 };
   
// this structure defines all the variables of your control interface 
struct {

    // input variable
  uint8_t rgb_1_r; // =0..255 Red color value
  uint8_t rgb_1_g; // =0..255 Green color value
  uint8_t rgb_1_b; // =0..255 Blue color value
  uint8_t switch_1; // =1 if switch ON and =0 if OFF
  int8_t slider_1; // =0..100 slider position

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

#define PIN_SWITCH_1 13

void setup() 
{
  RemoteXY_Init (); 
   
  pinMode (PIN_SWITCH_1, OUTPUT);
   
  // TODO you setup code
   
}

void loop() 
{ 
  RemoteXY_Handler ();
   
  digitalWrite(PIN_SWITCH_1, (RemoteXY.switch_1==0)?LOW:HIGH);
   
  // TODO you loop code
  // use the RemoteXY structure for data transfer

}