<![CDATA[RemoteXY community — Remotexy Wemos D1 R1 with P10 DMD]]> https://forum.remotexy.com/viewtopic.php?id=986 Thu, 30 Apr 2020 05:50:24 +0000 PunBB <![CDATA[Re: Remotexy Wemos D1 R1 with P10 DMD]]> https://forum.remotexy.com/viewtopic.php?pid=2909#p2909 giessnawan wrote:
remotexy wrote:

Try next code:

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266WIFI_LIB_CLOUD
#include <ESP8266WiFi.h>

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "ANDLYSTA"
#define REMOTEXY_WIFI_PASSWORD "baitijannati"
#define REMOTEXY_CLOUD_SERVER "cloud.remotexy.com"
#define REMOTEXY_CLOUD_PORT 6376
#define REMOTEXY_CLOUD_TOKEN "16909da5f60077751bd4598cbb649564"


// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255, 14, 0, 0, 0, 62, 0, 10, 186, 1,
  1, 0, 17, 23, 28, 28, 35, 31, 85, 80,
  0, 1, 0, 20, 57, 23, 23, 2, 31, 68,
  79, 87, 78, 0, 1, 0, 48, 86, 12, 12,
  2, 31, 88, 0, 129, 0, 17, 2, 28, 8,
  94, 65, 110, 116, 114, 105, 97, 110, 0, 7,
  5, 4, 12, 58, 8, 2, 26, 2, 11
};

// this structure defines all the variables and events of your control interface
struct {

  // input variables
  uint8_t button_1; // =1 if button pressed, else =0
  uint8_t button_2; // =1 if button pressed, else =0
  uint8_t RST; // =1 if button pressed, else =0
  char No_Antrian[11];  // string UTF8 end zero

  // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////



#include <DMD2.h>
#include <SPI.h>
#include "calibri13.h"

#define pin_A 16
#define pin_B 12
#define pin_sclk 0
#define pin_noe 15
#define panel_width 2
#define panel_heigh 2

SPIDMD dmd(panel_width, panel_heigh, pin_noe, pin_A, pin_B, pin_sclk);  // DMD controls the entire display

char dmdBuff[10];
int counter = 0;
int val = 0;
unsigned long previousMillis = 0;
const long interval = 1000;
//int debounce = 20;

void setup()
{

  delay(5000); // this is delay that i mentioned,if i uncomment this,the board cant be connected
  RemoteXY_Init ();
  // TODO you setup code
  dmd.beginNoTimer();
  dmd.setBrightness(255);
  dmd.selectFont(calibri13);
  dmd.begin();
  dmd.clearScreen();
  delay(20);
}


int pev_button_1 = 0;
int pev_button_2= 0;
int pev_RST  = 0;

void loop()
{
  RemoteXY_Handler ();

  sprintf(dmdBuff, "%.4d", counter);
  dmd.drawString( 4, 2, dmdBuff );

  strcpy  (RemoteXY.No_Antrian, dmdBuff );


  if ((pev_button_1 == 0) && (RemoteXY.button_1 == 1)) {
    counter++;
  } 
  if ((pev_RST  == 0) && (RemoteXY.RST== 1)) {
    dmd.clearScreen();
    counter = 0;
  } 
  if ((pev_button_2 == 0) && (RemoteXY.button_2 == 1)) {
    counter--;
  }

  pev_button_1  = RemoteXY.button_1;
  pev_button_2  = RemoteXY.button_2;
  pev_RST   = RemoteXY.RST;

  
}

will try this in a minute thank you very much

now try this with pro license of remotexy.
thanks,i already try the code,but it is only prevent me to doubled input,the tap still doesnt work,also the display queue number doesn't update in real time,i have to close and open the remotexy to get an update of the display queue number.the delay MUST before i begin the dmd,so i move the delay here it is the latest sketch i uploaded

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266WIFI_LIB_CLOUD
#include <ESP8266WiFi.h>

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "ANDLYSTA"
#define REMOTEXY_WIFI_PASSWORD "baitijannati"
#define REMOTEXY_CLOUD_SERVER "cloud.remotexy.com"
#define REMOTEXY_CLOUD_PORT 6376
#define REMOTEXY_CLOUD_TOKEN "16909da5f60077751bd4598cbb649564"


// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255, 14, 0, 0, 0, 62, 0, 10, 186, 1,
  1, 0, 17, 23, 28, 28, 35, 31, 85, 80,
  0, 1, 0, 20, 57, 23, 23, 2, 31, 68,
  79, 87, 78, 0, 1, 0, 48, 86, 12, 12,
  2, 31, 88, 0, 129, 0, 17, 2, 28, 8,
  94, 65, 110, 116, 114, 105, 97, 110, 0, 7,
  5, 4, 12, 58, 8, 2, 26, 2, 11
};

// this structure defines all the variables and events of your control interface
struct {

  // input variables
  uint8_t button_1; // =1 if button pressed, else =0
  uint8_t button_2; // =1 if button pressed, else =0
  uint8_t RST; // =1 if button pressed, else =0
  char No_Antrian[11];  // string UTF8 end zero

  // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////



#include <DMD2.h>
#include <SPI.h>
#include "calibri13.h"

#define pin_A 16
#define pin_B 12
#define pin_sclk 0
#define pin_noe 15
#define panel_width 2
#define panel_heigh 2

SPIDMD dmd(panel_width, panel_heigh, pin_noe, pin_A, pin_B, pin_sclk);  // DMD controls the entire display

char dmdBuff[10];
int counter = 0;
int val = 0;
unsigned long previousMillis = 0;
const long interval = 1000;
//int debounce = 20;

void setup()
{

  
  RemoteXY_Init ();
  // TODO you setup code
  delay(5000); // this is delay that i mentioned,if i uncomment this,the board cant be connected
  dmd.beginNoTimer();
  dmd.setBrightness(255);
  dmd.selectFont(calibri13);
  dmd.begin();
  dmd.clearScreen();
  delay(20);
}


int pev_button_1 = 0;
int pev_button_2= 0;
int pev_RST  = 0;

void loop()
{
  RemoteXY_Handler ();

  sprintf(dmdBuff, "%.4d", counter);
  dmd.drawString( 4, 2, dmdBuff );

  strcpy  (RemoteXY.No_Antrian, dmdBuff );


  if ((pev_button_1 == 0) && (RemoteXY.button_1 == 1)) {
    counter++;
  } 
  if ((pev_RST  == 0) && (RemoteXY.RST== 1)) {
    dmd.clearScreen();
    counter = 0;
  } 
  if ((pev_button_2 == 0) && (RemoteXY.button_2 == 1)) {
    counter--;
  }

  pev_button_1  = RemoteXY.button_1;
  pev_button_2  = RemoteXY.button_2;
  pev_RST   = RemoteXY.RST;

  
}
]]> Thu, 30 Apr 2020 05:50:24 +0000 https://forum.remotexy.com/viewtopic.php?pid=2909#p2909 <![CDATA[Re: Remotexy Wemos D1 R1 with P10 DMD]]> https://forum.remotexy.com/viewtopic.php?pid=2908#p2908 remotexy wrote:

Try next code:

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266WIFI_LIB_CLOUD
#include <ESP8266WiFi.h>

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "ANDLYSTA"
#define REMOTEXY_WIFI_PASSWORD "baitijannati"
#define REMOTEXY_CLOUD_SERVER "cloud.remotexy.com"
#define REMOTEXY_CLOUD_PORT 6376
#define REMOTEXY_CLOUD_TOKEN "16909da5f60077751bd4598cbb649564"


// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255, 14, 0, 0, 0, 62, 0, 10, 186, 1,
  1, 0, 17, 23, 28, 28, 35, 31, 85, 80,
  0, 1, 0, 20, 57, 23, 23, 2, 31, 68,
  79, 87, 78, 0, 1, 0, 48, 86, 12, 12,
  2, 31, 88, 0, 129, 0, 17, 2, 28, 8,
  94, 65, 110, 116, 114, 105, 97, 110, 0, 7,
  5, 4, 12, 58, 8, 2, 26, 2, 11
};

// this structure defines all the variables and events of your control interface
struct {

  // input variables
  uint8_t button_1; // =1 if button pressed, else =0
  uint8_t button_2; // =1 if button pressed, else =0
  uint8_t RST; // =1 if button pressed, else =0
  char No_Antrian[11];  // string UTF8 end zero

  // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////



#include <DMD2.h>
#include <SPI.h>
#include "calibri13.h"

#define pin_A 16
#define pin_B 12
#define pin_sclk 0
#define pin_noe 15
#define panel_width 2
#define panel_heigh 2

SPIDMD dmd(panel_width, panel_heigh, pin_noe, pin_A, pin_B, pin_sclk);  // DMD controls the entire display

char dmdBuff[10];
int counter = 0;
int val = 0;
unsigned long previousMillis = 0;
const long interval = 1000;
//int debounce = 20;

void setup()
{

  delay(5000); // this is delay that i mentioned,if i uncomment this,the board cant be connected
  RemoteXY_Init ();
  // TODO you setup code
  dmd.beginNoTimer();
  dmd.setBrightness(255);
  dmd.selectFont(calibri13);
  dmd.begin();
  dmd.clearScreen();
  delay(20);
}


int pev_button_1 = 0;
int pev_button_2= 0;
int pev_RST  = 0;

void loop()
{
  RemoteXY_Handler ();

  sprintf(dmdBuff, "%.4d", counter);
  dmd.drawString( 4, 2, dmdBuff );

  strcpy  (RemoteXY.No_Antrian, dmdBuff );


  if ((pev_button_1 == 0) && (RemoteXY.button_1 == 1)) {
    counter++;
  } 
  if ((pev_RST  == 0) && (RemoteXY.RST== 1)) {
    dmd.clearScreen();
    counter = 0;
  } 
  if ((pev_button_2 == 0) && (RemoteXY.button_2 == 1)) {
    counter--;
  }

  pev_button_1  = RemoteXY.button_1;
  pev_button_2  = RemoteXY.button_2;
  pev_RST   = RemoteXY.RST;

  
}

will try this in a minute thank you very much

]]> Thu, 30 Apr 2020 05:04:12 +0000 https://forum.remotexy.com/viewtopic.php?pid=2908#p2908 <![CDATA[Re: Remotexy Wemos D1 R1 with P10 DMD]]> https://forum.remotexy.com/viewtopic.php?pid=2907#p2907 remotexy wrote:
giessnawan wrote:

- does remotexy have autoconnect features?,like if the wifi cant be established, the board will become AP, then i can access with ip address of the board to setup the SSID and Password.

No this feature.


or can i insert autoconnect library together?

]]> Thu, 30 Apr 2020 05:03:08 +0000 https://forum.remotexy.com/viewtopic.php?pid=2907#p2907 <![CDATA[Re: Remotexy Wemos D1 R1 with P10 DMD]]> https://forum.remotexy.com/viewtopic.php?pid=2906#p2906 giessnawan wrote:

- does remotexy have autoconnect features?,like if the wifi cant be established, the board will become AP, then i can access with ip address of the board to setup the SSID and Password.

No this feature.

]]> Thu, 30 Apr 2020 04:49:26 +0000 https://forum.remotexy.com/viewtopic.php?pid=2906#p2906 <![CDATA[Re: Remotexy Wemos D1 R1 with P10 DMD]]> https://forum.remotexy.com/viewtopic.php?pid=2905#p2905 Try next code:

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266WIFI_LIB_CLOUD
#include <ESP8266WiFi.h>

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "ANDLYSTA"
#define REMOTEXY_WIFI_PASSWORD "baitijannati"
#define REMOTEXY_CLOUD_SERVER "cloud.remotexy.com"
#define REMOTEXY_CLOUD_PORT 6376
#define REMOTEXY_CLOUD_TOKEN "16909da5f60077751bd4598cbb649564"


// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255, 14, 0, 0, 0, 62, 0, 10, 186, 1,
  1, 0, 17, 23, 28, 28, 35, 31, 85, 80,
  0, 1, 0, 20, 57, 23, 23, 2, 31, 68,
  79, 87, 78, 0, 1, 0, 48, 86, 12, 12,
  2, 31, 88, 0, 129, 0, 17, 2, 28, 8,
  94, 65, 110, 116, 114, 105, 97, 110, 0, 7,
  5, 4, 12, 58, 8, 2, 26, 2, 11
};

// this structure defines all the variables and events of your control interface
struct {

  // input variables
  uint8_t button_1; // =1 if button pressed, else =0
  uint8_t button_2; // =1 if button pressed, else =0
  uint8_t RST; // =1 if button pressed, else =0
  char No_Antrian[11];  // string UTF8 end zero

  // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////



#include <DMD2.h>
#include <SPI.h>
#include "calibri13.h"

#define pin_A 16
#define pin_B 12
#define pin_sclk 0
#define pin_noe 15
#define panel_width 2
#define panel_heigh 2

SPIDMD dmd(panel_width, panel_heigh, pin_noe, pin_A, pin_B, pin_sclk);  // DMD controls the entire display

char dmdBuff[10];
int counter = 0;
int val = 0;
unsigned long previousMillis = 0;
const long interval = 1000;
//int debounce = 20;

void setup()
{

  delay(5000); // this is delay that i mentioned,if i uncomment this,the board cant be connected
  RemoteXY_Init ();
  // TODO you setup code
  dmd.beginNoTimer();
  dmd.setBrightness(255);
  dmd.selectFont(calibri13);
  dmd.begin();
  dmd.clearScreen();
  delay(20);
}


int pev_button_1 = 0;
int pev_button_2= 0;
int pev_RST  = 0;

void loop()
{
  RemoteXY_Handler ();

  sprintf(dmdBuff, "%.4d", counter);
  dmd.drawString( 4, 2, dmdBuff );

  strcpy  (RemoteXY.No_Antrian, dmdBuff );


  if ((pev_button_1 == 0) && (RemoteXY.button_1 == 1)) {
    counter++;
  } 
  if ((pev_RST  == 0) && (RemoteXY.RST== 1)) {
    dmd.clearScreen();
    counter = 0;
  } 
  if ((pev_button_2 == 0) && (RemoteXY.button_2 == 1)) {
    counter--;
  }

  pev_button_1  = RemoteXY.button_1;
  pev_button_2  = RemoteXY.button_2;
  pev_RST   = RemoteXY.RST;

  
}
]]> Thu, 30 Apr 2020 04:47:27 +0000 https://forum.remotexy.com/viewtopic.php?pid=2905#p2905 <![CDATA[Remotexy Wemos D1 R1 with P10 DMD]]> https://forum.remotexy.com/viewtopic.php?pid=2902#p2902 Hi this is my first poject using remotexy

here it is my goal
- using wemos d1 r1 as client to control Dot Matrix Display P10 32 x 64 ( 4 panel )
- the display will show the queue number from 0000 - 9999
- remotexy app have 3 button up,down,and reset
- using cloud server service

the problem i had
- the dmd using dmd2.h library, everytime i use dmd.begin function,the connection cannot be established between remotexy app and the wemos board.

- but if i put delay before dmd.begin on my void setup, connection can be established,but sometimes the wdt reset

- on remotexy app,button only response and send command to client if i hold it,if i tap, the button doesn't work

- since sometimes the button i hold it for too long,the count come doubled

- if the button need to be hold,can i display the counting on my remotexy also?,but i really hope the tap works, its better if i can display the counting on remotexy too, since the dmd display will be not visible to the operator on remotexy

- does remotexy have autoconnect features?,like if the wifi cant be established, the board will become AP, then i can access with ip address of the board to setup the SSID and Password.

here it is the sketch that i upload to my wemos board

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__ESP8266WIFI_LIB_CLOUD
#include <ESP8266WiFi.h>

#include <RemoteXY.h>

// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "ANDLYSTA"
#define REMOTEXY_WIFI_PASSWORD "baitijannati"
#define REMOTEXY_CLOUD_SERVER "cloud.remotexy.com"
#define REMOTEXY_CLOUD_PORT 6376
#define REMOTEXY_CLOUD_TOKEN "16909da5f60077751bd4598cbb649564"


// RemoteXY configurate
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255, 14, 0, 0, 0, 62, 0, 10, 186, 1,
  1, 0, 17, 23, 28, 28, 35, 31, 85, 80,
  0, 1, 0, 20, 57, 23, 23, 2, 31, 68,
  79, 87, 78, 0, 1, 0, 48, 86, 12, 12,
  2, 31, 88, 0, 129, 0, 17, 2, 28, 8,
  94, 65, 110, 116, 114, 105, 97, 110, 0, 7,
  5, 4, 12, 58, 8, 2, 26, 2, 11
};

// this structure defines all the variables and events of your control interface
struct {

  // input variables
  uint8_t button_1; // =1 if button pressed, else =0
  uint8_t button_2; // =1 if button pressed, else =0
  uint8_t RST; // =1 if button pressed, else =0
  char No_Antrian[11];  // string UTF8 end zero

  // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

#define PIN_BUTTON_1 1
#define PIN_BUTTON_2 3
#define PIN_RST 5

#include <DMD2.h>
#include <SPI.h>
#include "calibri13.h"

#define pin_A 16
#define pin_B 12
#define pin_sclk 0
#define pin_noe 15
#define panel_width 2
#define panel_heigh 2

SPIDMD dmd(panel_width, panel_heigh, pin_noe, pin_A, pin_B, pin_sclk);  // DMD controls the entire display

char dmdBuff[10];
int counter = 0;
int val = 0;
unsigned long previousMillis = 0;
const long interval = 1000;
//int debounce = 20;

void setup()
{
  RemoteXY_Init ();

  pinMode (PIN_BUTTON_1, OUTPUT);
  pinMode (PIN_BUTTON_2, OUTPUT);
  pinMode (PIN_RST, OUTPUT);
  delay(5000); // this is delay that i mentioned,if i uncomment this,the board cant be connected
  // TODO you setup code
  dmd.beginNoTimer();
  dmd.setBrightness(255);
  dmd.selectFont(calibri13);
  dmd.begin();
  dmd.clearScreen();
  delay(20);
}

void loop()
{
  RemoteXY_Handler ();

  digitalWrite(PIN_BUTTON_1, (RemoteXY.button_1 == 0) ? LOW : HIGH);
  digitalWrite(PIN_BUTTON_2, (RemoteXY.button_2 == 0) ? LOW : HIGH);
  digitalWrite(PIN_RST, (RemoteXY.RST == 0) ? LOW : HIGH);

  // TODO you loop code
  // use the RemoteXY structure for data transfer
  // do not call delay()
  sprintf(dmdBuff, "%.4d", counter);
  dmd.drawString( 4, 2, dmdBuff );

  unsigned long currentMillis = millis();
  if (currentMillis - previousMillis >= interval) {
    // save the last time you blinked the LED
    previousMillis = currentMillis;

    val = digitalRead(PIN_BUTTON_1);
    if (val == 1) {
      counter++;
      //     delay(debounce);
    } else if (digitalRead(PIN_RST) == 1) {
      dmd.clearScreen();
      counter = 0;
      //    delay(debounce);
    }  else if (digitalRead(PIN_BUTTON_2) == 1) {
      counter--;
      //    delay(debounce);}
    }
  }
}
]]> Wed, 29 Apr 2020 16:56:10 +0000 https://forum.remotexy.com/viewtopic.php?pid=2902#p2902