1 Topic by pkilimnik

  • pkilimnik
  • Member
  • Offline
  • Registered: 2021-02-08
  • Posts: 16

Topic: Работа с облаком при одиночном подключении ESP8266

Переделал библиотеки для  ESP8266 для работы с одиночным подключением (AT+CIPMUX=0), но вместо авторизации на облаке получаю это:
08:43:24.019 -> [    2.216] <- ATE0
08:43:24.019 -> [    2.216] <- OK
08:43:24.019 -> [    2.217] -> AT+CWMODE=1
08:43:24.019 -> [    2.221] <- OK
08:43:24.019 -> [    2.221] -> AT+CWQAP
08:43:24.019 -> [    2.225] <- OK
08:43:24.019 -> [    2.225] -> AT+CWDHCP=1,1
08:43:24.019 -> [    2.228] <- OK
08:43:24.019 -> [    2.229] -> AT+CIPMODE=0
08:43:24.019 -> [    2.232] <- OK
08:43:24.019 -> [    2.233] -> AT+CIPMUX=0
08:43:24.019 -> [    2.236] <- OK
08:43:24.019 -> [    2.237] -> AT+CWJAP="Best_WiFi",""
08:43:26.295 -> [    4.519] <- WIFI CONNECTED
08:43:27.350 -> [    5.556] <- WIFI GOT IP
08:43:29.218 -> [    7.421] <- OK
08:43:29.218 -> [    7.422] -> AT+CIPSTA?
08:43:29.218 -> [    7.424] <- +CIPSTA:ip:"192.168.0.4"
08:43:29.218 -> [    7.427] <- +CIPSTA:gateway:"192.168.0.1"
08:43:29.218 -> [    7.429] <- +CIPSTA:netmask:"255.255.255.0"
08:43:29.218 -> [    7.432] <- OK
08:43:29.218 -> [    7.434] Connecting to cloud: cloud.remotexy.com 6376 ..
08:43:29.218 -> [    7.439] -> AT+CIPSTART="TCP","cloud.remotexy.com",6376
08:43:29.286 -> [    7.510] <- CONNECT
08:43:29.286 -> [    7.511] <- OK
08:43:29.286 -> [    7.512] Cloud server connected
08:43:29.286 -> [    7.512] -> AT+CIPSEND=44
08:43:29.320 -> [    7.515] <- OK
08:43:29.320 -> [    7.516] <- >  *send 44 bytes*
08:43:29.320 -> [    7.519] -> 55 2C 00 11 0A 00 39 39 31 62 36 66 30 66 65 35
08:43:29.320 ->                37 35 30 61 31 33 64 36 64 30 64 34 38 62 34 35
08:43:29.320 ->                37 35 33 34 37 32 1A 02 0A 00 0F 80
08:43:29.320 -> [    7.534] <- Recv 44 bytes
08:43:29.354 -> [    7.579] <- SEND OK
08:43:29.559 -> [    7.787] <- +IPD,6:
08:43:39.618 -> [   17.734] Cloud server stoped
В чем может быть причина?

2 Reply by remotexy

  • remotexy
  • remotexy
  • Administrator
  • Offline
  • Registered: 2016-10-27
  • Posts: 933

Re: Работа с облаком при одиночном подключении ESP8266

Пришел ответ от сервера
08:43:29.559 -> [    7.787] <- +IPD,6:
Но вы его не приняли

3 Reply by pkilimnik (edited by pkilimnik 2021-03-30 08:11:23)

  • pkilimnik
  • Member
  • Offline
  • Registered: 2021-02-08
  • Posts: 16

Re: Работа с облаком при одиночном подключении ESP8266

remotexy wrote:

Пришел ответ от сервера
08:43:29.559 -> [    7.787] <- +IPD,6:
Но вы его не приняли

А возможно ли в принципе подключение к облаку в одиночном режиме?
Последнее, что удалось получить от сервера, это
[    2.216] -> ATE0
[    2.217] <- ATE0
[    2.217] <- OK
[    2.219] -> AT+CWMODE=1
[    2.222] <- OK
[    2.222] -> AT+CWQAP
[    2.226] <- OK
[    2.226] -> AT+CWDHCP=1,1
[    2.229] <- OK
[    2.230] -> AT+CIPMODE=0
[    2.233] <- OK
[    2.234] -> AT+CIPMUX=0
[    2.237] <- OK
[    2.238] -> AT+CWJAP="Best_WiFi",""
[    4.519] <- WIFI CONNECTED
[    5.556] <- WIFI GOT IP
[    7.421] <- OK
[    7.422] -> AT+CIPSTA?
[    7.424] <- +CIPSTA:ip:"192.168.0.2"
[    7.427] <- +CIPSTA:gateway:"192.168.0.1"
[    7.429] <- +CIPSTA:netmask:"255.255.255.0"
[    7.432] <- OK
[    7.434] Connecting to cloud: cloud.remotexy.com 6376 ..
[    7.439] -> AT+CIPSTART="TCP","cloud.remotexy.com",6376
[    7.507] <- CONNECT
[    7.508] <- OK
[    7.508] Cloud server connected
[    7.510] -> AT+CIPSEND=44
[    7.512] <- OK
[    7.513] <- >  *send 44 bytes*
[    7.516] -> 55 2C 00 11 0A 00 39 39 31 62 36 66 30 66 65 35
               37 35 30 61 31 33 64 36 64 30 64 34 38 62 34 35
               37 35 33 34 37 32 1A 02 0A 00 0F 80
[    7.532] <- Recv 44 bytes
[    7.578] <- SEND OK
[    7.785] <- +IPD,6:U
[   17.734] Cloud server stoped
[   17.735] -> AT+CIPCLOSE
[   17.737] <- CLOSED
[   17.738] <- OK