Topic: How to use ESP8266 to control led strip
How to use ESP8266 to control led strip something I tried to do such a code I did so far everything should work but the phone does not see my LED network
#define REMOTEXY_MODE__ESP8266WIFI_LIB_POINT
#include <ESP8266WiFi.h>
#include <RemoteXY.h>
#include <Adafruit_NeoPixel.h>
#ifdef __AVR__
#include <avr/power.h>
#endif
#define REMOTEXY_WIFI_SSID "LED"
#define REMOTEXY_WIFI_PASSWORD "12345678"
#define REMOTEXY_SERVER_PORT 6377
#define LED_PIN 6
#define LED_COUNT 3
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] =
{ 255,4,0,0,0,19,0,16,147,1,6,0,22,66,20,20,78,8,3,131,
20,12,22,8,64,26 };
struct {
uint8_t rgb_1_r;
uint8_t rgb_1_g;
uint8_t rgb_1_b;
uint8_t Mode;
uint8_t connect_flag;
} RemoteXY;
#pragma pack(pop)
Adafruit_NeoPixel strip(LED_COUNT, LED_PIN, NEO_GRB + NEO_KHZ800);
void setup()
{
#if defined(__AVR_ATtiny85__) && (F_CPU == 16000000)
clock_prescale_set(clock_div_1);
#endif
strip.begin();
strip.show();
strip.setBrightness(50);
RemoteXY_Init ();
Serial.begin(9600);
Serial.print("Start");
}
void loop()
{
RemoteXY_Handler ();
//Serial.println(RemoteXY.rgb_1_r);
//Serial.println(RemoteXY.rgb_1_g);
//Serial.println(RemoteXY.rgb_1_b);
//Serial.println(RemoteXY.Mode);
rainbow(10);
}
void colorWipe(uint32_t color, int wait) {
for(int i=0; i<strip.numPixels(); i++) {
strip.setPixelColor(i, color);
strip.show();
RemoteXY_delay(wait);
}
}
void theaterChase(uint32_t color, int wait) {
for(int a=0; a<10; a++) {
for(int b=0; b<3; b++) {
strip.clear();
for(int c=b; c<strip.numPixels(); c += 3) {
strip.setPixelColor(c, color);
}
strip.show();
RemoteXY_delay(wait);
}
}
}
void rainbow(int wait) {
for(long firstPixelHue = 0; firstPixelHue < 5*65536; firstPixelHue += 256) {
strip.rainbow(firstPixelHue);
strip.show();
RemoteXY_delay(wait);
}
}