Even more strange, it depends of the size of the string edit field:
edit field 6 char long works, edit field 32 chars long stucks... and this is absolutely the only difference !??!
this works:
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// you can enable debug logging to Serial at 115200
//#define REMOTEXY__DEBUGLOG
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__SOFTSERIAL
#include <SoftwareSerial.h>
// RemoteXY connection settings
#define REMOTEXY_SERIAL_RX 2
#define REMOTEXY_SERIAL_TX 3
#define REMOTEXY_SERIAL_SPEED 9600
#include <RemoteXY.h>
// RemoteXY GUI configuration
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] = // 111 bytes
{ 255, 8, 0, 67, 0, 104, 0, 17, 0, 0, 0, 179, 2, 200, 126, 126, 200, 1, 1, 5,
0, 67, 0, 2, 204, 12, 0, 6, 126, 10, 5, 2, 26, 33, 67, 6, 112, 90, 12, 18,
167, 98, 12, 6, 2, 26, 33, 7, 104, 112, 90, 12, 18, 183, 98, 12, 6, 2, 26, 7,
1, 88, 88, 24, 24, 54, 140, 24, 24, 0, 231, 31, 85, 86, 0, 71, 44, 10, 114, 114,
2, 17, 122, 122, 56, 8, 2, 24, 135, 0, 0, 0, 0, 0, 0, 112, 66, 0, 0, 160,
65, 0, 0, 32, 65, 0, 0, 0, 64, 24, 0
};
// this structure defines all the variables and events of your control interface
struct {
// input variables
char leer_voll[7]; // string UTF8 end zero
uint8_t UV_Button; // =1 if button pressed, else =0
// output variables
char clima[33]; // string UTF8 end zero
char freq[33]; // string UTF8 end zero
int8_t level; // from 0 to 60
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
void setup()
{
RemoteXY_Init ();
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
// TODO you loop code
// use the RemoteXY structure for data transfer
// do not call delay(), use instead RemoteXY_delay()
if (RemoteXY.UV_Button) {RemoteXY.level = 50;}
else{ RemoteXY.level = 10;}
}
this does not work and stuck, as soon as i push the button:
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// you can enable debug logging to Serial at 115200
//#define REMOTEXY__DEBUGLOG
// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__SOFTSERIAL
#include <SoftwareSerial.h>
// RemoteXY connection settings
#define REMOTEXY_SERIAL_RX 2
#define REMOTEXY_SERIAL_TX 3
#define REMOTEXY_SERIAL_SPEED 9600
#include <RemoteXY.h>
// RemoteXY GUI configuration
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] = // 111 bytes
{ 255, 34, 0, 67, 0, 104, 0, 17, 0, 0, 0, 179, 2, 200, 126, 126, 200, 1, 1, 5,
0, 67, 0, 2, 204, 12, 0, 6, 126, 10, 5, 2, 26, 33, 67, 6, 112, 90, 12, 18,
167, 98, 12, 6, 2, 26, 33, 7, 104, 112, 90, 12, 18, 183, 98, 12, 6, 2, 26, 33,
1, 88, 88, 24, 24, 54, 140, 24, 24, 0, 231, 31, 85, 86, 0, 71, 44, 10, 114, 114,
2, 17, 122, 122, 56, 8, 2, 24, 135, 0, 0, 0, 0, 0, 0, 112, 66, 0, 0, 160,
65, 0, 0, 32, 65, 0, 0, 0, 64, 24, 0
};
// this structure defines all the variables and events of your control interface
struct {
// input variables
char leer_voll[33]; // string UTF8 end zero
uint8_t UV_Button; // =1 if button pressed, else =0
// output variables
char clima[33]; // string UTF8 end zero
char freq[33]; // string UTF8 end zero
int8_t level; // from 0 to 60
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
void setup()
{
RemoteXY_Init ();
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
// TODO you loop code
// use the RemoteXY structure for data transfer
// do not call delay(), use instead RemoteXY_delay()
if (RemoteXY.UV_Button) {
RemoteXY.level = 50;
}
else {
RemoteXY.level = 10;
}
}
