Code Uploads but no Wifi or Bluetooth Generated on ESP-WROOM-32

I'm sure I'm doing something wrong here, but I'm not seeing it. 

Configured a project.  Generated the code.  Successfully uploaded the code to two separate ESP32 boards that work with other code,  but I'm not getting a Wifi access point nor Bluetooth (if I reconfigure it to use BLE) that any phone or computer can detect.  Generated code follows:

/*
   -- DeeDee Animation Test --
   
   This source code of graphical user interface
   has been generated automatically by RemoteXY editor.
   To compile this code using RemoteXY library 3.1.13 or later version
   download by link http://remotexy.com/en/library/
   To connect using RemoteXY mobile app by link http://remotexy.com/en/download/                   
     - for ANDROID 4.15.01 or later version;
     - for iOS 1.12.1 or later version;
   
   This source code is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.   
*/

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// you can enable debug logging to Serial at 115200
//#define REMOTEXY__DEBUGLOG   

// RemoteXY select connection mode and include library
#define REMOTEXY_MODE__WIFI_POINT

#include <WiFi.h>

// RemoteXY connection settings
#define REMOTEXY_WIFI_SSID "ArtooDeeDee"
#define REMOTEXY_WIFI_PASSWORD "Animations!"
#define REMOTEXY_SERVER_PORT 6377
#define REMOTEXY_ACCESS_PASSWORD "Asteroids"

#include <RemoteXY.h>

// RemoteXY GUI configuration 
#pragma pack(push, 1) 
uint8_t RemoteXY_CONF[] =   // 119 bytes
  { 255,5,0,0,0,112,0,19,0,0,0,82,50,68,68,0,2,1,106,200,
  1,1,6,0,1,22,27,24,24,9,191,31,51,32,76,69,71,0,129,2,
  6,101,12,0,31,82,50,45,68,68,32,65,78,73,77,65,84,73,79,78,
  0,1,55,28,24,24,9,191,31,50,32,76,69,71,0,1,11,73,24,24,
  9,191,31,87,105,103,103,108,101,0,1,39,73,24,24,9,191,31,80,101,
  101,107,0,1,68,73,24,24,9,191,31,67,104,117,99,107,108,101,0 };
 
// this structure defines all the variables and events of your control interface
struct {

    // input variables
  uint8_t button_01; // =1 if button pressed, else =0
  uint8_t button_02; // =1 if button pressed, else =0
  uint8_t button_03; // =1 if button pressed, else =0
  uint8_t button_04; // =1 if button pressed, else =0
  uint8_t button_05; // =1 if button pressed, else =0

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;   
#pragma pack(pop)

/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////

#define PIN_BUTTON_01 1
#define PIN_BUTTON_02 5
#define PIN_BUTTON_03 6
#define PIN_BUTTON_04 7
#define PIN_BUTTON_05 8

void setup()
{
  RemoteXY_Init ();
 
  pinMode (PIN_BUTTON_01, OUTPUT);
  pinMode (PIN_BUTTON_02, OUTPUT);
  pinMode (PIN_BUTTON_03, OUTPUT);
  pinMode (PIN_BUTTON_04, OUTPUT);
  pinMode (PIN_BUTTON_05, OUTPUT);
 
  // TODO you setup code
 
}

void loop()
{
  RemoteXY_Handler ();
 
  digitalWrite(PIN_BUTTON_01, (RemoteXY.button_01==0)?LOW:HIGH);
  digitalWrite(PIN_BUTTON_02, (RemoteXY.button_02==0)?LOW:HIGH);
  digitalWrite(PIN_BUTTON_03, (RemoteXY.button_03==0)?LOW:HIGH);
  digitalWrite(PIN_BUTTON_04, (RemoteXY.button_04==0)?LOW:HIGH);
  digitalWrite(PIN_BUTTON_05, (RemoteXY.button_05==0)?LOW:HIGH);
 
  // TODO you loop code
  // use the RemoteXY structure for data transfer
  // do not call delay(), use instead RemoteXY_delay()

}