'waterTempRunPrint' was not declared in this scope пишет при компиляции.
/*
-- rector --
This source code of graphical user interface
has been generated automatically by RemoteXY editor.
To compile this code using RemoteXY library 3.1.13 or later version
download by link http://remotexy.com/en/library/
To connect using RemoteXY mobile app by link http://remotexy.com/en/download/
- for ANDROID 4.15.01 or later version;
- for iOS 1.12.1 or later version;
This source code is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
*/
//////////////////////////////////////////////
// RemoteXY include library //
//////////////////////////////////////////////
// можете включить вывод отладочной информации в Serial на 115200
#define REMOTEXY__DEBUGLOG
// определение режима соединения и подключение библиотеки RemoteXY
#define REMOTEXY_MODE__ESP32CORE_BLE
#include <BLEDevice.h>
// настройки соединения
#define REMOTEXY_BLUETOOTH_NAME "reactor"
#define REMOTEXY_ACCESS_PASSWORD "Baza2025"
#include <RemoteXY.h>
// конфигурация интерфейса RemoteXY
#pragma pack(push, 1)
uint8_t RemoteXY_CONF[] = // 300 bytes
{ 255,4,0,16,0,37,1,19,0,0,0,114,101,97,99,116,111,114,0,30,
1,106,200,1,1,5,0,71,3,46,49,49,56,2,2,24,75,0,0,0,
0,0,0,150,67,0,0,200,66,0,0,32,65,0,0,0,0,24,208,186,
208,190,209,130,209,145,208,187,0,135,0,0,0,0,0,0,122,67,37,0,
0,122,67,0,0,150,67,71,52,47,49,49,56,2,2,24,75,0,0,0,
0,0,0,200,67,0,0,200,66,0,0,32,65,0,0,0,0,24,209,130,
209,128,209,131,208,177,208,176,0,135,0,0,0,0,0,0,150,67,51,0,
0,150,67,0,0,200,67,7,8,12,89,18,45,64,2,26,2,1,71,0,
89,53,53,56,3,178,24,135,0,0,0,0,0,0,200,66,0,0,160,65,
0,0,32,65,0,0,0,64,24,208,178,209,139,209,133,208,190,208,180,0,
135,0,0,0,0,0,0,112,66,94,0,0,112,66,0,0,160,66,36,0,
0,160,66,0,0,200,66,71,53,89,53,53,56,3,178,24,135,0,0,0,
0,0,0,200,66,0,0,160,65,0,0,32,65,0,0,0,64,24,208,190,
208,177,209,128,208,176,209,130,208,186,208,176,0,135,0,0,0,0,0,0,
112,66,94,0,0,112,66,0,0,160,66,36,0,0,160,66,0,0,200,66 };
// структура определяет все переменные и события вашего интерфейса управления
struct {
// input variables
float waterTempRunPrint;
// output variables
float tReactorPrint; // oт 0 до 300
float tSmokePrint; // oт 0 до 400
float tempOutPrint; // oт 0 до 100
float tempInPrint; // oт 0 до 100
// other variable
uint8_t connect_flag; // =1 if wire connected, else =0
} RemoteXY;
#pragma pack(pop)
/////////////////////////////////////////////
// END RemoteXY include //
/////////////////////////////////////////////
void setup()
{
RemoteXY_Init ();
// TODO you setup code
}
void loop()
{
RemoteXY_Handler ();
Serial.print("waterTempRunPrint = ");
Serial.print(waterTempRunPrint,1);
Serial.println("*C");
RemoteXY_delay(500);
// TODO you loop code
// используйте структуру RemoteXY для передачи данных
// не используйте функцию delay(), вместо нее используйте RemoteXY_delay()
}
