инструкции работы с новыми функциями

/*
   -- Test Fixed String --
   
   To compile this code using RemoteXY library 4.1.8 or later version 
   download by link http://remotexy.com/en/library/
   To connect using RemoteXY mobile app by link http://remotexy.com/en/download/                   
     - for ANDROID 4.18.03 or later version;
     - for iOS 1.14.1 or later version;
    
   To interact with the GUI, please refer to the manual: 
   https://remotexy.com/ru/help/code/interaction/

   This source code was automatically generated by the RemoteXY editor and 
   is an example for the RemoteXY library. 
   Licensed under the MIT License. See the LICENSE file in the RemoteXY library
   root (https://github.com/RemoteXY/RemoteXY-Arduino-library) for full license 
   details.             
*/

//////////////////////////////////////////////
//        RemoteXY include library          //
//////////////////////////////////////////////

// you can enable debug logging to Serial at 115200
//#define REMOTEXY__DEBUGLOG    

// RemoteXY select connection mode and include library 
#define REMOTEXY_MODE__SOFTSERIAL

#include <SoftwareSerial.h>

// RemoteXY connection settings 
#define REMOTEXY_SERIAL_RX 2
#define REMOTEXY_SERIAL_TX 3
#define REMOTEXY_SERIAL_SPEED 9600
#define REMOTEXY_ACCESS_PASSWORD "1234"


#include <RemoteXY.h>

// RemoteXY GUI configuration  
#pragma pack(push, 1)  
uint8_t const PROGMEM RemoteXY_CONF_PROGMEM[] =   // 95 bytes V19 
  { 255,3,0,1,0,88,0,19,0,0,0,84,101,115,116,32,70,105,120,101,
  100,32,83,116,114,105,110,103,0,31,1,106,200,1,1,4,0,74,34,136,
  40,10,41,31,24,135,65,71,114,101,101,110,0,93,66,89,101,108,108,111,
  119,0,37,64,82,101,100,0,1,41,21,24,24,0,135,31,0,1,41,60,
  24,24,0,94,31,0,1,41,97,24,24,0,1,31,0 };
  
// this structure defines all the variables and events of your control interface 
struct {

    // input variables
  uint8_t button_01; // =1 if button pressed, else =0, from 0 to 1
  uint8_t button_02; // =1 if button pressed, else =0, from 0 to 1
  uint8_t button_03; // =1 if button pressed, else =0, from 0 to 1

    // output variables
  uint8_t strings_01; // from 0 to 3

    // other variable
  uint8_t connect_flag;  // =1 if wire connected, else =0

} RemoteXY;   
#pragma pack(pop)
 
/////////////////////////////////////////////
//           END RemoteXY include          //
/////////////////////////////////////////////




void RemoteXY_button_01_event() {
  // TODO: RemoteXY.button_01 was changed
  if (RemoteXY.button_01 == 1){           // If green button (_01) is pressed...
    RemoteXY.strings_01 = 1;              //   display flashing string "Green"
  }
  else {
    RemoteXY.strings_01 = 0;              // Else clear string
  }

}

void RemoteXY_button_02_event() {
  // TODO: RemoteXY.button_02 was changed
  if (RemoteXY.button_02 == 1){           // If yellow button (_02) is pressed...
    RemoteXY.strings_01 = 2;              //   display slower flashing string "Yellow"
  }
  else {
    RemoteXY.strings_01 = 0;              // Else clear string
  }

}

void RemoteXY_button_03_event() {
  // TODO: RemoteXY.button_03 was changed
  if (RemoteXY.button_03 == 1){           // If red button (_03) is pressed...
    RemoteXY.strings_01 = 3;              //   display non-flashing string "Red"
  }
  else {
    RemoteXY.strings_01 = 0;              // Else clear string
  }

}


void setup() 
{
  RemoteXY_Init ();  // initialization by macros 
  
  RemoteXYEngine.addVariableEvent (RemoteXY.button_01, RemoteXY_button_01_event);
  RemoteXYEngine.addVariableEvent (RemoteXY.button_02, RemoteXY_button_02_event);
  RemoteXYEngine.addVariableEvent (RemoteXY.button_03, RemoteXY_button_03_event);

  
  // TODO you setup code
  
}

void loop() 
{ 
  RemoteXYEngine.handler ();   
   
  
  // TODO you loop code
  // use the RemoteXY structure for data transfer
  // do not call delay(), use instead RemoteXYEngine.delay() 

}